EMG 60X Active Humbucker Pickup in Brushed Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4324
Description
EMG 60X Active Humbucker Pickup in Brushed Chrome
The EMG 60X delivers tight, articulate humbucker tone with minimal noise floor and extended headroom. This active pickup uses close-aperture coils and ceramic magnets to capture defined attack and controlled sustain, making it ideal for recording and mixing across rock, metal, and high-gain sessions where consistency and clarity are non-negotiable.
Tone & Frequency Response
A resonant frequency of 2.28 kHz positions the 60X for controlled midrange presence without harshness in the mix. The ceramic magnet design paired with covered coil construction yields a balanced output that avoids the brittleness common to ceramic-based pickups, while string output of 3.00 V and strum output of 8.00 V provide adequate signal drive into tube or solid-state amplifier chains without excessive compression, ensuring clean tracking through your preamp.
Studio Performance & Installation
This active design operates on a 9V battery with an exceptionally efficient current draw of 80 microamps at 9V, yielding approximately 3000 hours of battery life per cell—eliminating mid-session power worries during tracking days. The included solderless Quik-Connect system accelerates guitar setup and swaps, while the split shaft volume and active tone control set allows quick onboard EQ adjustment between takes; the output noise floor of -107 dB ensures minimal hum even in electrically dense control rooms and recording spaces.
Key Features
- Ceramic magnet construction
- Close aperture coil design
- Resonant frequency: 2.28 kHz
- String output: 3.00 V
- Strum output: 8.00 V
- Output noise: -107 dB (60 Hz)
- Output impedance: 2.00 kΩ
- Active tone control with split shaft volume pot included
- Solderless Quik-Connect wiring system
- 9V battery operation with 80 µA current draw
- Battery life: 3000 hours per cell
- Covered pickup design; brushed chrome finish
The 60X combines low noise performance with straightforward active-circuit operation, delivering predictable tone and reliable battery longevity for home studios and tracking sessions where signal integrity and minimal downtime are essential.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60X is an active humbucker engineered for tight, noise-free recording in high-gain and rock sessions, delivering a balanced midrange and extended headroom that sits well in dense mixes. Its ceramic magnet and close-aperture coil design capture articulate attack and controlled sustain, while the onboard active tone control allows precise EQ shaping during tracking or layering. Low output noise at -107 dB ensures clean signal integrity straight into your interface or preamp, making it a dependable choice for studio punch without compromise.
Who This Is For
Great for
- ✓ rock
- ✓ metal
- ✓ high-gain
- ✓ studio sessions
- ✓ live performance
Not the best pick for
- – jazz
- – blues
- – folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What makes the 60X different from the EMG 81?
The 60X uses a ceramic magnet with close-aperture coils tuned to a 2.28 kHz resonant frequency for a more balanced, articulate midrange; the 81 is voiced differently and typically favored for more aggressive high-gain tones. Both are active designs with low noise, but the 60X excels when you need clarity and definition across rock and metal without harshness.
How long does the 9V battery last?
The 60X draws only 80 microamps at 9V, yielding approximately 3000 hours of battery life per cell—roughly 4 months of regular playing. Solderless Quik-Connect wiring makes battery swaps quick and straightforward.
Is this pickup good for jazz or blues?
No. The 60X is voiced for rock, metal, and high-gain applications with a defined, articulate character that doesn't suit jazz or blues playing styles, which typically benefit from warmer, less aggressive humbucker voicings.
What's included and how do I install it?
The 60X includes the active tone control and split-shaft volume pot wired with a solderless Quik-Connect system for easy plug-and-play installation. You'll need a 9V battery to power the active circuit, and standard guitar soldering skills are not required.
What output level and noise performance should I expect?
String output is 3.00 V and strum output is 8.00 V with an output noise floor of -107 dB, ensuring clean signal drive into any amp and minimal hum even in electrically noisy venues or studios.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.