EMG 60AX Active Humbucker Pickup in Ivory
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3470
Description
EMG 60AX Active Humbucker Pickup in Ivory
The EMG 60AX delivers articulate, controlled output with the punchy character that active electronics bring to humbucker designs. This Ivory finish version offers a clean aesthetic while maintaining the same tight low-end response and midrange clarity that make the 60AX a workhorse for tracking and mixing in styles demanding definition without sacrificing power. The solderless installation system makes integration into an existing guitar straightforward, with no heavy modification work required.
Tone & Recording Performance
With a 1.84 kHz resonant frequency and 8.00V strum output, this pickup sits in the sweet spot between aggressive gain and harmonic articulation. The 3.00V string output ensures clean articulation on single notes, while the 2.00 Kohm output impedance and -105 dBV noise floor deliver exceptionally low noise with high headroom—essential for tracking clean signals to tape or DAW and maintaining definition in dense mixes without unwanted hum or artifacts.
Installation & Power
The solderless connectors and included battery bus system eliminate the need for traditional wiring. The pickup runs on a standard 9-volt battery with an exceptional 3000-hour battery life, and it supports supply voltages up to 27 volts DC for those pushing toward extreme output levels. Current draw sits at just 80 microamps at 9V, keeping battery consumption minimal during extended recording sessions and multi-take work.
Key Features
- Alnico magnet type for warm, defined tone
- 1.84 kHz resonant frequency
- 8.00V output voltage (strum)
- 3.00V output voltage (string)
- -105 dBV output noise at 60 Hz
- 2.00 Kohm output impedance
- 80 microamps current draw at 9V
- 3000-hour battery life per 9V cell
- 27 volts DC maximum supply rating
- Solderless installation with included connectors
- Includes 25k volume pot, 25k tone pot, battery bus, stereo output jack, pickup cables, and mounting screws
- Ivory finish
This is a proven, low-noise active humbucker that rewards studio recording and session work with transparency and control.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60AX captures punchy, controlled humbucker tone with a tight low end and clear midrange that cuts through dense mixes without muddiness—perfect for metal, progressive, and high-gain session work. Its low noise floor (-105 dBV) and high headroom ensure clean, transparent recording even at aggressive input levels, while the solderless system lets you install it quickly and focus on tracking. This pickup rewards precision playing and layered recording with harmonic clarity and articulation that sits naturally in the mix.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, Studio Sessions, High-Gain Recording |
|---|---|
| Tonal character | Tight low end, articulate midrange, controlled output, low noise, high headroom |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What genres and playing styles is the EMG 60AX best suited for?
The 60AX excels in metal, hard rock, progressive, and studio high-gain recording where tight articulation and controlled output are essential. It is not recommended for jazz, blues, or folk styles, which typically benefit from the warmer, more dynamic character of passive pickups.
How long does a 9V battery last, and how difficult is battery replacement?
A single 9V battery provides 3000 hours of play time. The solderless design and included battery bus system make swapping batteries straightforward—no soldering or complex wiring required.
What comes included with the EMG 60AX?
The pickup ships with a 25k volume pot, 25k tone pot, battery bus, stereo output jack, pickup cables, mounting screws, and solderless connectors ready for installation. All wiring components are included so you can wire it immediately into your guitar.
How does the 60AX compare to EMG's 81/85 models?
The 60AX sits between the 81 and 85 in output character, offering a balanced blend of articulation and power. With its 8.00V strum output and -105 dBV noise floor, it provides the clarity and low-noise performance needed for studio recording and high-gain live work, while remaining less aggressive than the 81.
Will this pickup work in my existing guitar without major modification?
Yes. The solderless installation system and included connectors eliminate the need for traditional wiring or heavy modification. It fits standard humbucker cavities and installs cleanly into most electric guitars.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.