EMG 60A Long Shaft Active Humbucker Pickup in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4944
Description
EMG 60A Long Shaft Active Humbucker Pickup in White
The EMG 60A is an active humbucker engineered for tracking and mixing scenarios where articulate midrange clarity matters without sacrificing the controlled punch expected from a modern active system. Its alnico magnet construction sets it apart from standard ceramic designs, delivering a warmer, more organic character while maintaining the consistent output and ultra-low noise floor critical for studio recording. The long shaft configuration accommodates standard guitar potentiometer holes, making retrofit installation straightforward on most instruments.
Tone & Recording Performance
With a resonant frequency of 2.20 kHz, this pickup cuts through a dense mix without introducing mud or harshness in the vocal or snare range. Output measures 3.00V on single-string plucking and 4.50V on full strums, providing the dynamic response needed to capture pick attack and sustain with equal definition. The 10 Kohm output impedance and -101 dBV noise floor ensure pristine signal integrity with virtually no hum—essential for high-gain tracking and layering without noise buildup across multiple takes.
Power & Session Stability
This active system runs on a standard 9V battery with a rated battery life of 3000 hours, translating to roughly one year of typical studio use before replacement. The 80 microamp current draw keeps power consumption minimal during long session days, and the pickup tolerates a maximum supply of 27 volts DC, providing headroom for alternative power solutions or integration with multi-effects chains and audio interfaces without signal degradation.
Key Features
- Active humbucker with alnico magnet for warm, organic tone
- 18.7mm threaded long shaft for standard potentiometer compatibility
- Resonant frequency: 2.20 KHz
- Output voltage: 3.00V (string) / 4.50V (strum)
- Output noise: -101 dBV at 60 Hz
- Output impedance: 10 Kohm
- Current draw: 80 microamps @ 9V
- Battery life: 3000 hours
- Maximum supply: 27 volts DC
- Connector: 1/4" mono phone plug
- Includes 25 kOhm volume and tone potentiometer, battery bus, stereo output jack, and mounting hardware
- Color: White
The EMG 60A combines the precision engineering of an active system with the musicality of alnico magnets, making it a reliable choice for tracking and production work where controlled output and tonal character are equally non-negotiable.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60A is a warm, articulate active humbucker that brings clarity to dense mixes without the harshness typical of ceramic-magnet systems, making it a smart retrofit for recording metal, progressive rock, or any high-gain session work. Its low -101 dBV noise floor and controlled 3–4.5V output integrate cleanly with preamps and interfaces, and the long shaft design installs on most guitars without routing. Track with confidence knowing this pickup will sit focused in the midrange and deliver consistent, hum-free signal across punch and sustain.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Studio Sessions
- ✓ High-Gain Applications
Not the best pick for
- – Traditional Jazz
- – Acoustic Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the 60A and EMG's 81/85 pickups?
The 60A uses alnico magnets for a warmer, more organic tone with articulate midrange clarity, while the 81/85 pair use ceramic magnets and deliver higher output and aggression. The 60A is better suited for players who want definition and note separation in high-gain contexts; the 81/85 excel when maximum drive and raw power are the priority.
How long does the battery last, and what's the installation like?
The 9V battery lasts approximately 3000 hours—roughly one year of typical use. Installation is straightforward: the 18.7mm threaded long shaft fits standard guitar potentiometer holes, and the pickup comes with a battery bus, volume and tone potentiometer, stereo output jack, and mounting hardware.
Will this pickup work in a high-gain rig without noise or feedback?
Yes. The -101 dBV noise floor and active circuitry virtually eliminate hum, and the controlled 3–4.5V output remains tight and focused even in high-gain and studio applications. The 80 microamp current draw is efficient, and the pickup tolerates up to 27 volts DC, so it integrates cleanly with effect chains and alternative power solutions.
What genres and playing styles suit the 60A best?
The 60A excels in metal, hard rock, progressive rock, and studio sessions where articulate midrange clarity and controlled output matter. Its warm, organic character makes it less suited for traditional jazz or acoustic folk, where a different tonal approach is expected.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.