EMG 60A Active Humbucker Pickup in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG2654
Description
EMG 60A Active Humbucker Pickup in White
The EMG 60A is a dual-coil active humbucker engineered to capture articulate, controlled signal with minimal noise floor—critical for tracking clean recordings and maintaining clarity in dense mixes. This pickup combines ceramic magnet definition with EMG's proven preamp design, performing equally well in high-gain rhythm work and cleaner lead contexts where transient detail and separation matter. The white finish integrates seamlessly into light-colored or contrasting pickguard setups.
Recording Tone & Output Character
A resonant frequency of 2.95 kHz and 1.0 V RMS output deliver balanced frequency response without harshness, while the 3.0 V peak output provides dynamic headroom for capturing articulate transients and controlled sustain without clipping preamp inputs. The –89 dBV output noise specification ensures studio-grade signal integrity even at high gain tracking levels, eliminating hum and unwanted artifacts that compromise mix clarity.
Design & Electronics
Built around ceramic magnets with close aperture coils and housed in an epoxy casing with shielded preamp, this pickup resists electromagnetic interference and maintains consistent performance across session work. The 10 kΩ output impedance interfaces reliably with audio interfaces, amp inputs, and studio gear, while 80 microamps current draw at 9V and 3000-hour battery life minimize maintenance concerns and downtime during extended recording sessions.
Key Features
- Dual coil active humbucker with ceramic magnets
- Ceramic magnet with close aperture coils
- Resonant frequency: 2.95 kHz
- RMS output voltage: 1.0 V; peak output: 3.0 V
- Output noise: –89 dBV
- Output impedance: 10 kΩ
- Current draw: 80 microamps at 9V
- Battery life: 3000 hours
- Epoxy casing with shielded preamp
- Includes volume/tone controls, output jack, battery clip set, screws, and springs
- 1/4" mono phone plug connector
- Dimensions: 2.63 x 2.38 x 6 inches; metal body with molded plastic top
The EMG 60A remains a trusted choice for producers and engineers seeking active pickup performance with studio-grade low noise, predictable output, and straightforward integration into any guitar electronics cavity.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60A is an active humbucker engineered for studio tracking and mixing, offering a balanced 2.95 kHz resonant frequency and articulate transient response that sits well in layered arrangements. Its –89 dBV noise floor and 1.0 V RMS output give you clean, predictable recordings from high-gain tones to cleaner textures, making it versatile across metal, rock, and contemporary production styles. Straightforward integration with standard guitar electronics and a 3000-hour battery life mean reliable sessions without downtime.
Who This Is For
Great for
- ✓ High-Gain Metal
- ✓ Hard Rock
- ✓ Studio Sessions
- ✓ Extended Range
Not the best pick for
- – Traditional Jazz
- – Acoustic Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What skill level is the EMG 60A right for?
The EMG 60A is designed for intermediate, advanced, and professional players. It thrives in high-gain metal and hard rock, but also delivers articulate cleans in studio contexts where definition matters, so it rewards technique at any level within that range.
How long does the battery last?
The battery lasts approximately 3000 hours at a 9V draw of 80 microamps. That translates to roughly four months of daily use, minimizing downtime and maintenance between replacements.
Will this pickup work in my guitar without modification?
Yes, the EMG 60A uses standard 10 kΩ output impedance and a 1/4" mono phone plug connector, making it compatible with any guitar electronics cavity and standard amp inputs. It comes with volume and tone controls, battery clip, output jack, screws, and springs for easy installation.
What makes the EMG 60A different from passive humbuckers?
The active preamp design delivers a –89 dBV noise floor, eliminating hum and artifacts even at extreme gain settings—much cleaner than passive pickups in high-noise environments. Its 3.0 V peak output provides dynamic headroom for articulate transients and controlled sustain across articulate cleans and high-gain tones alike.
Is the white finish durable?
The EMG 60A features an epoxy casing with a shielded preamp for durability and electromagnetic interference resistance. The white finish integrates seamlessly with light-colored or contrasting pickguards and is built to withstand regular use.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.