EMG 60A Active Humbucker Pickup in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5746
Description
EMG 60A Active Humbucker Pickup in Red
The EMG 60A captures a balanced, articulate signal that anchors solidly in the midrange—neither as dark as a passive humbucker nor as aggressive as the 81. This active design tracks beautifully across rock, metal, and fusion sessions where clarity and controlled output remain equally critical. The red finish presents a striking visual, backed by proven electronics engineered for studio-session reliability.
Tone & Recording Character
A 2.95 kHz resonant frequency and 1.0 RMS output voltage yield punchy, defined note separation with excellent pick articulation. The 3.0 peak output voltage and -89 dBV output noise floor preserve dynamic headroom and reject hum, while the 10 kOhm output impedance integrates cleanly with standard audio interfaces, preamp inputs, and amplifier stages in the tracking chain.
Construction & Signal Path
Built with ceramic magnets and close aperture coils, the pickup employs a shielded preamp housed in epoxy casing for consistent performance and electromagnetic noise rejection across recording sessions. The 80 microamp draw at 9V delivers approximately 3000 hours of battery life, reducing session interruptions and keeping your signal chain uninterrupted through long tracking days.
Key Features
- Resonant Frequency: 2.95 kHz
- RMS Output Voltage: 1.0
- Peak Output Voltage: 3.0
- Output Noise: -89 dBV
- Output Impedance: 10 kOhm
- Current Draw @ 9V: 80 Microamps
- Battery Life: 3000 hours
- Magnet Type: Ceramic
- Coil Configuration: Close aperture coils
- Housing: Epoxy casing with shielded preamp
- Dimensions: 4.8 x 3.4 x 2.75 inches
- Includes: Quik-Connect cable, pre-wired split shaft volume/tone control set, output jack, battery clip set, screws, and springs
The EMG 60A provides a proven platform for recording engineers and producers seeking active-pickup responsiveness without sacrificing midrange presence or straightforward studio installation.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60A is an active humbucker voiced for balanced, articulate recordings in rock, metal, and fusion—its 2.95 kHz resonant peak and controlled 1.0 RMS output keep notes separated and sitting cleanly in the mix without muddiness. The shielded preamp and low noise floor (-89 dBV) make tracking and overdubbing hassle-free, while the predictable 10 kOhm output impedance works transparently with any interface or preamp. Pick this if you need a workhorse active pickup that records with clarity and dynamic range across heavy and technical genres.
Who This Is For
Great for
- ✓ Rock
- ✓ Metal
- ✓ Fusion
- ✓ Hard Rock
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
Is the EMG 60A suitable for blues or jazz?
No—the EMG 60A is optimized for rock, metal, and fusion where articulation and punch are priorities. Its active voice and defined character are not designed for the smooth, warm, breathy tones blues and jazz players typically seek.
What comes in the box?
The package includes the pickup itself, a Quik-Connect cable, a pre-wired split shaft volume/tone control set, output jack, battery clip set, mounting screws, and springs. You'll have everything needed for installation.
How long does a battery last?
At 80 microamps current draw from a 9V battery, expect approximately 3000 hours of playing time before replacement—roughly 3–4 months of moderate to heavy use.
How does the EMG 60A compare to the EMG 81?
The 60A offers a more balanced, articulate midrange tone with better note separation, while the 81 is darker and more aggressive. Choose the 60A for clarity across genres or the 81 if you want maximum thickness and aggression.
Is this a passive or active pickup?
The EMG 60A is active—it requires a 9V battery and includes an onboard preamp that delivers low noise, controlled output, and consistent response across a wide range of playing dynamics.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.