EMG 60A Active Humbucker Pickup in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3388
Description
EMG 60 Active Humbucker Pickup in Chrome
The EMG 60 captures articulate, punchy midrange character with a polished chrome aesthetic that reads clearly in the mix. This ceramic magnet humbucker pairs aggressive clarity with controlled output, tracking cleanly across high-gain and moderate-drive recording scenarios. The active circuitry ensures consistent performance across varying cable runs and preamp input impedances, backed by straightforward battery operation for reliable session operation.
Active Electronics & Output Stability
Running on a single 9V battery rated for approximately 3,000 hours of continuous operation, this pickup maintains a 3.5V peak output with exceptionally clean electronics—-89 dBV output noise @ 60Hz keeps unwanted hum to a minimum during recording. The 10 kOhm output impedance delivers stable signal delivery regardless of cable length or interface input characteristics, critical for maintaining clean tracking through the signal chain.
Tone & Frequency Response in the Mix
A 2.95 kHz resonant frequency positions this pickup in the upper-midrange sweet spot, yielding definition and cut without excessive brightness that can complicate mix balance. The ceramic magnet construction and stainless steel cap combine to produce tight articulation ideal for modern rock, metal, and fusion productions where note clarity and separation drive the recording decision.
Key Features
- Active circuitry with single 9V battery power
- Ceramic magnet construction
- Stainless steel cap, polished to mirror finish
- Resonant frequency: 2.95 kHz
- Peak output voltage: 3.5V
- Output noise: -89 dBV @ 60Hz
- Output impedance: 10 kOhms
- Current draw: 80 microamps @ 9V
- Battery life: 3,000 hours
- Includes EMG Quik-Connect cable, prewired split shaft control set, output jack, battery clip, and mounting hardware
- Epoxy casing construction
- Chrome finish
This pickup's combination of active noise rejection, articulate midrange voicing, and comprehensive wiring accessories makes it a direct drop-in solution for home studios and tracking sessions seeking modern clarity, tracking stability, and reliable session performance.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60A is an active humbucker designed to cut through dense mixes with articulate upper-midrange presence and controlled output, making it ideal for tracking and mixing metal, fusion, and modern rock sessions. Its 2.95 kHz resonant frequency and ceramic magnet construction deliver tight, defined articulation that remains punchy in dense arrangements, while the active circuitry ensures rock-solid signal integrity with minimal noise floor (-89 dBV @ 60Hz). Choose it for studio work when you need a pickup that translates clearly to recording without losing aggression or definition in the mix.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Fusion
- ✓ Modern Rock
- ✓ Progressive
Not the best pick for
- – Blues
- – Jazz
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's included with the EMG 60A?
The pickup comes with an EMG Quik-Connect cable, prewired split shaft control set, output jack, battery clip, and mounting hardware—everything needed for a drop-in installation.
How long does the 9V battery last?
EMG rates the battery for approximately 3,000 hours of continuous operation, meaning typical gigging and studio use will yield months of reliable performance before replacement.
Is this pickup suitable for blues or jazz?
No. The EMG 60A is voiced specifically for metal, hard rock, fusion, and modern rock—its aggressive midrange clarity and punchy character are not optimized for blues or jazz tones.
How does the active circuitry benefit performance?
Active electronics deliver consistent output and frequency response regardless of cable length or amp input impedance, plus exceptionally clean signal with -89 dBV output noise at 60Hz, minimizing hum in high-gain setups.
What is the output level and impedance?
Peak output is 3.5V with a 10 kOhm output impedance, providing stable signal delivery and compatibility with standard guitar rigs and high-gain systems.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.