EMG 60 Long Shaft Active Humbucker Pickup in Gold
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3490
Description
EMG 60 Long Shaft Active Humbucker Pickup in Gold
The EMG 60 delivers articulate, punchy response with tight low-end and defined midrange—a workhorse active humbucker that cuts through dense mixes without sacrificing clarity. Its compact coil geometry and ceramic magnet construction produce controlled output ideal for tracking modern rock, metal, and aggressive tones in the studio. The brushed gold finish pairs functional long-shaft construction with visual distinction.
Recording & Signal Characteristics
This active design operates at 2.95 kHz resonant frequency with 1.0V RMS and 3.0V peak output, feeding your interface or preamp with consistent signal and minimal noise floor at -89 dBV. The 10 Kohm output impedance ensures clean transmission with tight control and reduced feedback, particularly valuable when stacking layers in high-gain sessions or managing multiple guitar tracks.
Integration & Setup
The 18.7mm threaded long shaft potentiometer design integrates seamlessly with control plates requiring extended shaft dimensions. Housed in epoxy casing with ceramic magnets and close-aperture coils, this pickup requires a single 9V battery (rated for approximately 3000 hours operation at 80 microamps current draw), minimizing maintenance interruptions during recording sessions.
Key Features
- Ceramic magnet construction for defined, controlled response
- Close aperture coils similar to mini-humbucker geometry
- Active electronics with 1.0V RMS / 3.0V peak output voltage
- 10 Kohm output impedance
- 2.95 kHz resonant frequency
- Output noise: -89 dBV
- 18.7mm threaded long shaft potentiometer design
- Single 9V battery operation (3000-hour battery life)
- 80 microamps current draw @ 9V
- Includes EMG Quik-Connect cable
- Includes pre-wired split shaft volume/tone control set, output jack, and battery clip set
- Brushed gold finish
This EMG 60 combines proven active electronics, low-noise operation, and straightforward installation into a versatile pickup suited to studio sessions demanding reliability, tonal precision, and consistency across multiple takes.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60 is an active humbucker that captures articulate, controlled tone with tight low-end and defined midrange—ideal for recording heavy rock, metal, and modern productions where high-gain clarity matters. Its low noise floor (-89 dBV), 1.0V RMS output, and 10 Kohm impedance ensure clean, consistent signal to your interface or preamp with minimal coloration, making it a reliable workhorse for tracking aggressive material and sitting well in dense mixes.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Modern Rock
- ✓ High-gain applications
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What makes the EMG 60 different from the EMG 81?
The EMG 60 delivers a more articulate, punchy response with defined midrange and tight low-end, while the 81 focuses on high output and scooped tone. The 60 suits modern rock and metal players seeking clarity and precision; the 81 is preferred for extreme high-gain and scooped character. Both are active designs with low noise, but the 60's compact coil geometry provides tighter control.
What genres work best with this pickup?
The EMG 60 excels in metal, hard rock, and modern rock, particularly in high-gain applications where cutting through dense mixes matters. It is not optimized for jazz, blues, or folk styles, which typically benefit from passive pickups with warmer, more vintage response.
How long does the 9V battery last?
The EMG 60 is rated for approximately 3000 hours of operation at 80 microamps current draw. This translates to roughly 4–5 months of typical daily use before replacement.
Does this pickup come with everything needed to install it?
Yes, the EMG 60 includes the EMG Quik-Connect cable, a pre-wired split shaft volume and tone control set, output jack, and battery clip set. You will need a 9V battery to power the active electronics and may need soldering equipment if your guitar doesn't already have a compatible cavity and wiring harness.
What is the long-shaft design, and do I need it?
The 18.7mm threaded long-shaft potentiometer design fits control plates that require extended shaft dimensions—typically found on guitars with thicker pickguards or specific control cavity designs. Check your guitar's control plate before ordering; standard short-shaft pickups may not fit properly.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
✨ For You
Based on what you've been looking at.