EMG 60 Long Shaft Active Humbucker Pickup in Brushed Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4600
Description
EMG 60 Long Shaft Active Humbucker Pickup in Brushed Chrome
The EMG 60 is a workhorse active humbucker engineered to capture articulate, controlled recordings with a minimal noise floor. This covered design in brushed chrome delivers a balanced midrange character ideal for tracking and mixing sessions across rock, metal, and contemporary productions—offering clarity and definition without sacrificing the punch needed to cut through a dense mix.
Recording & Mix Characteristics
With a resonant frequency of 2.95 kHz, the EMG 60 emphasizes upper midrange definition while maintaining full low-end body for strong fundamental presence in the mix. Peak output reaches 3.0 volts with an RMS output of 1.0 volt, delivering sufficient signal headroom for any interface or console preamp without introducing noise—the output noise floor sits at -89 dBV, ensuring a clean, artifact-free capture even during high-gain overdubs or compression.
Electronics & Power
This active design operates on a single 9V battery with impressive efficiency, drawing only 80 microamps for an estimated 3000 hours of battery life between changes. The 10K ohm DC resistance pairs with solderless connectivity via a 2-wire plus battery configuration, streamlining installation and reducing downtime in the studio.
Key Features
- Active humbucker with ceramic magnet construction
- Covered design in brushed chrome finish
- Long shaft format for standard guitar installations
- Resonant frequency: 2.95 kHz
- Peak output voltage: 3.0V / RMS output: 1.0V
- Output noise: -89 dBV
- DC resistance: 10K ohm
- Single 9V battery with 80 microamp draw
- Estimated battery life: 3000 hours
- Solderless connectivity with 2-wire plus battery configuration
- Includes quik-connect cable, pre-wired split shaft control set, output jack, battery clip, mounting hardware, and springs
- Stainless steel cap
The EMG 60 combines proven active-pickup reliability with versatile tonal balance and straightforward installation, making it a dependable choice for retrofit or replacement applications in the home studio.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60 delivers articulate, controlled active humbucker tone with a 2.95 kHz resonant peak that sits clearly in the midrange while maintaining full low-end body—ideal for rock, metal, and contemporary recording sessions. Its -89 dBV noise floor ensures clean, noise-free tracking even at high gain or when stacking layers in the mix. With solderless installation and 3000 hours of battery life per 9V cell, it's a dependable retrofit choice for home and professional studios.
Who This Is For
Great for
- ✓ Rock
- ✓ Metal
- ✓ Hard Rock
- ✓ Studio Sessions
- ✓ Home Recording
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's included with the EMG 60?
The pickup ships with a quik-connect cable, pre-wired split shaft control set, output jack, battery clip, mounting hardware, springs, and stainless steel cap. Solderless 2-wire plus battery connectivity simplifies installation.
How long does the battery last?
A single 9V battery draws only 80 microamps and provides an estimated 3000 hours of playing time—roughly 3–4 months of regular use.
Is the EMG 60 suitable for jazz or blues?
No. The EMG 60 is optimized for rock, metal, hard rock, and contemporary styles. Its articulate midrange and high-gain ready character make it less suited to jazz and blues tones.
How does the EMG 60 compare to the EMG 81/85 or other active humbuckers?
The EMG 60 emphasizes balanced midrange clarity at 2.95 kHz with a 3.0V peak output and -89 dBV noise floor, offering less aggressive output than the 81/85 while maintaining the same active reliability and solderless convenience. It sits between vintage warmth and modern punch, making it versatile for retrofit and studio use.
Do I need soldering experience to install this pickup?
No. The EMG 60 uses solderless 2-wire plus battery connectivity, reducing installation complexity and minimizing the risk of heat damage to surrounding electronics.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.