EMG 58 Long Shaft Active Humbucker Pickup in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG8008
Description
EMG 58 Long Shaft Active Humbucker Pickup in White
The EMG 58 is a versatile active humbucker engineered to deliver articulate mids and defined lows with minimal noise floor—ideal for tracking and mixing sessions where clarity matters. This white-cap pickup maintains transparent signal integrity through your audio chain, capturing punchy fundamentals while preserving the note definition required in dense arrangements.
Active Electronics & Power
Powered by a single 9V battery with exceptional longevity—3000 hours of runtime on one cell—this pickup draws only 80 microamps at 9V, eliminating concern about power drain during multi-hour recording sessions. The -90dB noise floor at 60Hz ensures a clean signal path free from hum and interference, critical for isolated DI recordings and post-production flexibility.
Tone & Magnetic Design
Built around an Alnico magnet with two steel bars, the 58 produces 1.0V output on single strings and 1.50V on full strums, with a 4.95 kHz resonant frequency that emphasizes upper-midrange articulation—the sweet spot for guitars to cut through busy mixes without sounding thin. 10 kΩ output impedance ensures transparent signal transmission through preamps and recording interfaces.
Key Features
- Active humbucker with Alnico magnet and dual steel bar design
- Output Voltage: 1.0V (single string) / 1.50V (strum)
- Output Noise: -90dB @ 60Hz
- Output Impedance: 10 kΩ
- Resonant Frequency: 4.95 kHz
- Single 9V battery operation with 3000-hour battery life
- Current draw: 80 microamps @ 9V; maximum supply 27V DC
- Requires 25K Ohm audio taper controls
- Solderless install system includes 25k volume pot, 25k tone pot, battery bus, stereo jack, dual pickup bus, mounting hardware, and all necessary cables
- White cap finish
The complete solderless installation package streamlines setup, allowing rapid experimentation across tracking sessions—swap configurations without rewiring, and spend more time capturing performances and refining tone at the mix console.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 58 is a versatile active humbucker that captures punchy, articulate tone with defined lows and modern clarity—ideal for recording rock and metal tracks that need to sit clear in a mix without excessive noise. The solderless installation and included pots and wiring harness streamline setup, so you can focus on tracking, and its low -90dB noise floor ensures a clean signal path even in less-than-ideal recording environments. Pick this if you want a reliable, modern-sounding pickup that delivers consistent results across multiple takes.
Who This Is For
| Best suited for | Modern Rock, Metal, Studio Sessions, Home Recording |
|---|---|
| Tonal character | Articulate mids, defined lows, low noise floor, punchy output, modern clarity |
| Less specialized for | Traditional Jazz, Blues (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Beginner / Intermediate / Advanced / Professional |
Frequently Asked Questions
What's included in the box?
The package includes the EMG 58 pickup, a complete solderless installation system with 25k volume pot, 25k tone pot, battery bus, stereo jack, dual pickup bus, mounting hardware, and all necessary cables. No soldering required.
How long does the battery last?
A single 9V battery provides approximately 3000 hours of runtime, with the pickup drawing only 80 microamps at 9V, so battery drain is minimal during extended playing sessions.
What kind of tone should I expect?
The EMG 58 produces articulate mids and defined lows with a 4.95 kHz resonant frequency that emphasizes upper-midrange clarity. Output is 1.0V on single strings and 1.50V on full strums, delivering modern punch without excessive noise.
What guitar styles does this pickup work best for?
This pickup excels in modern rock and metal, as well as studio sessions and home recording where clarity and low noise are priorities. It is not recommended for traditional jazz or blues playing.
Do I need any special tools or soldering skills to install this?
No—the solderless installation system is designed for quick, tool-free setup. All cables and components plug together, making it accessible even for beginners doing their first pickup swap.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.