EMG 57 Active Humbucker Pickup in Chrome
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4306
Description
EMG 57 Active Humbucker Pickup in Chrome
The EMG 57 captures articulate, balanced tone with the reliability of active electronics and the professional appearance of brushed chrome finish. This pickup excels at delivering clarity and punch through dense arrangements, making it a go-to choice in recording sessions where definition across the full frequency spectrum is essential—from modern rock to metal to genre-crossing productions.
Tone & Recording Performance
The Alnico magnet and 2.11 kHz resonant frequency center the pickup's response in the midrange, allowing it to sit prominently in mixes without losing articulation or note separation. Output voltages of 3V (string) and 4.5V (strum) provide sufficient level to drive preamps and interfaces cleanly without unnecessary compression or noise, while the -100 dB output noise floor maintains transparency during overdubs and critical monitoring sessions.
Power & Studio Integration
This active design operates from a single 9V battery with remarkable efficiency, delivering 1500 hours of battery life per change and supporting supply voltages up to 27V DC for extended headroom during gain-staging. The solderless 1/4" (6.35mm) mono phone plug connector and 2-wire battery connection simplify setup between tracking sessions, while the 10 kOhm output impedance guarantees reliable operation with standard instrument cables and audio interfaces used in home studios and professional facilities alike.
Key Features
- Alnico (A) magnet type for balanced, articulate response
- Resonant frequency: 2.11 kHz
- Output voltage (string): 3V
- Output voltage (strum): 4.5V
- Output noise: -100 dB at 60 Hz
- Output impedance: 10 kOhm
- Current draw at 9V: 160 mA
- Battery life: 1500 hours
- Maximum supply voltage: 27V DC
- Solderless connectivity with 1/4" (6.35mm) mono phone plug
- Metal body construction
- Brushed chrome finish
The EMG 57 pairs active circuit stability with articulate voicing, making it an essential choice for producers and engineers who require consistent, clear signal reproduction across multiple tracking sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 57 active humbucker excels at capturing articulate, punchy tone with exceptional clarity in recording—especially valuable when tracking modern rock, metal, or genre-crossing sessions where definition across the midrange is critical. Its -100 dB noise floor and balanced output voltages (3V string, 4.5V strum) integrate cleanly into audio interfaces and preamps, while the Alnico magnet's 2.11 kHz resonant peak helps vocals and guitars sit distinctly in a mix. Pick it for home and professional studio work where you need consistent, noise-free articulation without endless EQ tweaking.
Who This Is For
Great for
- ✓ Modern Rock
- ✓ Metal
- ✓ Studio Sessions
- ✓ Home Recording
Not the best pick for
- – Traditional Jazz
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the EMG 57 and the EMG 81?
The EMG 57 uses an Alnico magnet with a 2.11 kHz resonant frequency for articulate, midrange-forward tone that works well across rock and metal genres. The EMG 81 is voiced for brighter, high-output aggression and is often paired with the 57 in a dual-pickup setup; the 57 shines as a single or neck pickup where balance and clarity are priorities.
How long does the 9V battery last?
The EMG 57 delivers approximately 1500 hours of battery life on a single 9V battery, with current draw of 160 mA at 9V. The active circuitry is exceptionally efficient, so you'll get months of regular use between battery changes.
Does this pickup require soldering to install?
No—the EMG 57 features solderless connectivity with a 1/4 inch mono phone plug connector and 2-wire battery connection, streamlining installation and minimizing noise from poor solder joints. Standard instrument cables and audio interfaces are fully compatible thanks to its 10 kOhm output impedance.
What output levels should I expect, and will it work with my audio interface?
The EMG 57 outputs 3V on single strings and 4.5V on strums with a -100 dB noise floor, providing enough gain to drive preamps and interfaces cleanly without excessive noise. The 10 kOhm output impedance ensures seamless compatibility with standard instrument cables and modern audio interfaces.
Is the EMG 57 suitable for jazz or blues?
The EMG 57 is optimized for modern rock, metal, and high-definition recording applications. Its midrange-forward, articulate character is less suited to traditional jazz and folk styles, which typically benefit from warmer, less aggressive pickup voices.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $10 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
✨ For You
Based on what you've been looking at.