EMG 57/66 TW Long Shaft Active Humbucker Pickup Set in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG7159
Description
EMG 57/66 TW Long Shaft Active Humbucker Pickup Set in Chrome
The EMG 57/66 TW delivers articulate, punchy tracking through active electronics with measurable thickness and output advantages over standard humbucker designs. This set pairs a responsive neck pickup with a cutting bridge unit, engineered for producers and engineers tracking diverse playing styles while maintaining clarity and controlled sustain in the mix. The long shaft configuration and included push-pull potentiometers unlock selectable single and dual coil voicings, expanding session versatility without rewiring.
Electronics & Recording Character
Built on active circuitry with 10K DC resistance, these pickups capture low-noise signal and tight transient response ideal for modern recording and production work. The three coil design enables selectable single and dual coil sounds through the included push-pull controls, letting you dial in anything from articulate single-coil clarity to full humbucker body in post-production or real-time tracking. Alnico and ceramic magnets in the bridge paired with Alnico and steel in the neck create distinct sonic character at each position, supporting varied session demands.
Installation & Studio Setup
The solderless connectivity system streamlines installation during guitar prep, while the long shaft configuration accommodates deeper guitar cavities and thicker mounting rings. At 1.1" thick—approximately 0.22" thicker than standard EMG humbuckers—these pickups require adequate cavity depth and may demand some routing consideration on certain instruments. The complete package includes 5-wire plus ground and battery conductors, two 25K push-pull potentiometers, stereo output jack, battery bus, mounting hardware, and pickup cables.
Key Features
- Active humbucker pickup set with low-noise circuitry
- Selectable single and dual coil sounds via proprietary three coil design
- Long shaft configuration for deeper cavities
- 1.1" thickness (0.22" thicker than standard EMG humbuckers)
- 10K DC resistance per coil
- Alnico/Ceramic magnet in bridge; Alnico/Steel in neck
- Solderless connectivity for straightforward installation
- Covered design in chrome finish
- Includes two 25K push-pull potentiometers and tone controls
- 5-wire plus ground and battery conductors
- Complete hardware package with stereo output jack and battery bus
- Supplied with pickup cables and mounting hardware
This set balances the precision and low-noise characteristics EMG is known for with expanded tonal flexibility, making it a strong choice for home studios and producers integrating active electronics or seeking more voicing options to streamline multi-take sessions and post-production workflows.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 57/66 TW captures articulate, tight-bottomed active tone with switchable single and dual coil character through onboard push-pull controls—perfect for recording metal, prog, and hard rock where clarity and controlled dynamics matter. The low-noise circuitry tracks fast picking and complex riffs cleanly, and the three-coil design lets you explore different voicings within a single take or session. This set is a practical choice for producers and engineers building versatile tracking rigs that handle modern heavy genres without sacrificing definition.
Who This Is For
| Best suited for | Metal, Progressive, Hard Rock, Studio Sessions, Gigging |
|---|---|
| Tonal character | Articulate, punchy, tight low end, controlled sustain, low-noise |
| Less specialized for | Traditional Jazz, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
Do these pickups require modification to my guitar?
The long shaft and 1.1" thickness are approximately 0.22" thicker than standard EMG humbuckers, so cavity depth and mounting ring thickness should be verified before purchase; some guitars may require minor routing. The solderless connectivity simplifies wiring, and all hardware, potentiometers, and cables are included in the package.
Can I switch between single-coil and humbucker sounds?
Yes—the three-coil design and included 25K push-pull potentiometers allow you to select between articulate single-coil voicings and full humbucker body without rewiring. This flexibility expands your tonal range across both bridge and neck positions.
What skill level is this pickup set for?
Designed for intermediate, advanced, and professional players comfortable with active electronics and modern playing styles. The low-noise circuitry and tight response suit metal, progressive, hard rock, and studio session work best.
What's included in the package?
The complete set includes the bridge and neck pickups, two 25K push-pull potentiometers, stereo output jack, battery bus, pickup cables, and all mounting hardware. The 5-wire plus ground and battery conductors support solderless installation.
How does this compare to other active pickups?
The EMG 57/66 TW balances EMG's signature low-noise precision with expanded tonal range via selectable coil configurations—offering more voicing flexibility than the EMG 81/85, while maintaining the tight, articulate character in a thicker profile suited to deeper guitar cavities.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $22 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.