EMG 57/66 Long Shaft Active Humbucker Pickup Set in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5074
Description
EMG 57/66 Long Shaft Active Humbucker Pickup Set in Red
The EMG 57/66 set captures articulate, controlled recordings with the clarity and punch of active electronics in a versatile neck-and-bridge configuration. These pickups track dynamics with precision—tight articulation on pick attack, full body on strummed passages—and the long-shaft potentiometer compatibility integrates cleanly into existing guitar cavities for retrofit sessions. The red finish coordinates with darker aesthetic builds while the solderless wiring system eliminates time-consuming installation, getting instruments into the recording chain faster.
Active Electronics & Recording Tone
Both pickups operate on 9V battery power with a 1500-hour battery life at 160 microamps current draw, and feature Alnico V magnets with steel poles for defined high-end articulation in the mix. The 57 bridge pickup resonates at 2.11 kHz with 3.00V output (string), 4.50V output (strum), while the 66 neck pickup sits lower at 1.61 kHz with matching output levels, providing natural tonal separation that sits tight in dense arrangements without excessive midrange coloration.
Wiring Flexibility & Session Versatility
Both pickups employ four-conductor wiring for coil-splitting and series/parallel reconfiguration, enabling custom voicing options that extend instrumental range across multiple tracking scenarios. The package includes 2 × 25K volume potentiometers (split shaft), 2 × 25K tone potentiometers (split shaft), and 1 battery bus—everything required for a complete active setup without soldering, reducing prep time between sessions.
Key Features
- Active humbucker set (HH configuration) with Alnico V magnets and steel poles
- Bridge pickup: 2.11 kHz resonant frequency, 3.00V string output / 4.50V strum output
- Neck pickup: 1.61 kHz resonant frequency, 3.00V string output / 4.50V strum output
- 9V battery operation with 1500-hour battery life at 160 microamps
- 10 kΩ output impedance and -100 dB output noise (60 Hz) on both pickups
- 10K DC resistance
- Four-conductor wiring for coil-splitting and series/parallel modes
- Solderless connectivity for fast installation
- Includes 2 × 25K volume potentiometers and 2 × 25K tone potentiometers (split shaft)
- Includes battery bus connector
- 27V DC supply rated
- Red finish
This set combines responsive active recording performance with installation efficiency, making it a direct replacement option for guitars requiring long-shaft pots and solderless wiring.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 57/66 Long Shaft Active Humbucker Set brings studio-grade clarity and dynamic responsiveness to your recording rig, with the 57 bridge pickup capturing tight transients and full chord definition at 2.11 kHz, and the 66 neck pickup sitting lower at 1.61 kHz for natural tonal separation. Active 9V operation delivers low noise (-100 dB at 60 Hz), consistent 1500-hour battery life, and flexible four-conductor wiring for custom coil-splitting and series/parallel configurations that let you shape your tone across tracking and mixing sessions. The solderless installation and included potentiometers make this a plug-and-play upgrade for home studios seeking professional-grade output clarity and punchy character without soldering complexity.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Studio Sessions
- ✓ Gigging
Not the best pick for
- – Traditional Jazz
- – Folk
- – Acoustic-focused playing
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What is the battery life, and how often will I need to replace it?
The 9V battery lasts approximately 1500 hours at normal 160-microramp current draw, which translates to roughly 3–6 months of regular playing depending on usage. The included battery bus connector makes swaps straightforward.
Can I configure these pickups differently than standard humbucker mode?
Yes. Both pickups feature four-conductor wiring that supports coil-splitting and series/parallel reconfiguration, allowing you to voice them beyond standard humbucker operation with the right switching setup.
Will these pickups fit my guitar without modification?
These pickups are designed for guitars with long-shaft potentiometer cavities and support solderless wiring. If your guitar uses standard short-shaft pots or requires soldering, you may need additional modifications or components.
How do the 57 bridge and 66 neck pickups differ tonally?
The 57 bridge resonates at 2.11 kHz with a brighter attack, while the 66 neck sits lower at 1.61 kHz for warmer response. Both deliver the same output levels (3.00V single-note, 4.50V strummed), providing natural tonal separation without excessive midrange coloration.
What is included in the box?
The set includes both active pickups, 2 volume potentiometers (25K split shaft), 2 tone potentiometers (25K split shaft), and a battery bus connector. No soldering required; all wiring is solderless.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $17 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.