EMG 57/66 Active Humbucker Pickup Set in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5041
Description
EMG 57/66 Active Humbucker Pickup Set in Black
The EMG 57/66 set captures tight, articulate active pickup performance with minimal noise and maximum clarity for tracking and mixing. The bridge-mounted 57 uses Alnico V magnets for punchy midrange definition that cuts through dense arrangements, while the neck-mounted 66 employs ceramic pole pieces for smooth, controlled response ideal for layered textures. Built on solderless connectivity, this set installs cleanly and integrates seamlessly into most guitar wiring schemes for efficient studio setup.
Tonal Character & Studio Recording Response
The 57's resonant frequency of 2.11 kHz emphasizes pick attack and string articulation, translating to clear definition on rhythm tracks and lead overdubs. The 66's lower resonant frequency of 1.61 kHz produces warmer neck tones that blend cohesively on chord-driven arrangements and layered textures. Both pickups deliver 3 V output (string) and 4.5 V output (strum) with –100 dB noise floor at 60 Hz, ensuring clean tracking and mixing free from hum and interference. The 10 KOhm output impedance maintains consistent tone across interface inputs and cable runs in any studio configuration.
Installation & Session Flexibility
Solderless connectors eliminate traditional soldering—all connections use included plug-in cables for fast, reliable assembly and quick instrument swaps between sessions. The package includes 2 pickup cables, 4 connect cables, 1 output cable, and 1 battery cable, plus a complete control circuit with 2×25K volume pots, 2×25K tone pots, stereo output jack, battery bus, and dual pickup in/out bus. Standard 49mm Tune-O-Matic spacing and 10mm short (Strat-style) potentiometer shafts fit most solid-body designs without routing modification, streamlining instrument setup for multi-guitar sessions.
Key Features
- Bridge pickup: Alnico V magnets and steel pole pieces with 2.11 kHz resonant frequency
- Neck pickup: Ceramic pole pieces with 1.61 kHz resonant frequency
- 3 V output (string) / 4.5 V output (strum)
- 10 KOhm output impedance
- –100 dB noise floor at 60 Hz
- Solderless plug-in installation with 2 pickup cables, 4 connect cables, 1 output cable, 1 battery cable
- Includes 2×25K volume pots, 2×25K tone pots, stereo output jack, battery bus, and dual pickup in/out bus
- Standard 49mm Tune-O-Matic string spacing
- 10mm short (Strat-style) potentiometer shaft length
- Active battery-powered operation
- Includes 2 pairs mounting screws and springs
This set pairs aggressive bridge articulation for cutting rhythm and lead tracks with controlled neck warmth for smooth layering and sustain, delivering studio-grade active tone without soldering downtime.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 57/66 Set captures articulate, punchy tones ideal for heavy music tracking and layered rhythm parts, with the 57 bridge emphasizing pick attack and the 66 neck providing smooth sustain for chord work. The active circuitry delivers a –100 dB noise floor and consistent 10 KOhm impedance, ensuring clean, studio-ready recordings free of hum across any cable run or interface input. Install these for sessions requiring aggressive clarity, tight low-end definition, and pro-grade signal integrity without soldering.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Lead Work
- ✓ Studio Sessions
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the bridge (57) and neck (66) pickups in this set?
The bridge 57 uses Alnico V magnets with a 2.11 kHz resonant frequency to emphasize pick attack and string articulation for lead and rhythm work. The neck 66 uses ceramic pole pieces with a 1.61 kHz resonant frequency for smoother, warmer response suited to chord sustain and cleaner tones.
Do I need to solder these pickups into my guitar?
No—the EMG 57/66 uses solderless plug-in connectors. All connections are made with included cables, making installation fast and reliable without traditional soldering or wiring expertise.
Will these pickups fit my guitar?
The set includes 49mm Tune-O-Matic spacing and 10mm short potentiometer shafts, fitting most solid-body designs without routing modification. Check that your guitar accepts standard humbucker spacing and wiring before purchase.
How much output do these pickups have, and will they hum?
Both pickups deliver 3V output (string) and 4.5V output (strum) with a –100 dB noise floor at 60 Hz, ensuring clean amplification free from hum and 60 Hz interference. The 10 KOhm output impedance maintains consistent tone across different cable lengths and amp inputs.
What genres are these pickups best suited for?
These pickups excel in metal, hard rock, progressive, and other heavy styles requiring articulate lead work and punchy rhythm tone. They are not optimized for jazz, blues, or folk applications.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $17 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.