EMG 57/66 Active Humbucker Pickup Set in Black Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5038
Description
EMG 57/66 Active Humbucker Pickup Set in Black Chrome
The EMG 57/66 pairing delivers the balanced aggression and articulate response that defines modern active pickup technology. The 57 bridge maintains tight, controlled output while the 66 neck provides warm, articulate separation—a combination that ensures clarity across all registers without sacrificing punch in your recordings. Black chrome finish integrates seamlessly into contemporary instrument aesthetics.
Tone & Electronics
Both pickups operate on 9V DC with identical output specs: 3.00V string pluck, 4.50V strum, and -100 dB noise floor at 60 Hz. The EMG 57 resonates at 2.11 KHz for focused midrange presence that cuts through a dense mix, while the EMG 66 peaks at 1.61 KHz for smooth, controlled lows that sit cleanly in the low end. This frequency separation ensures the bridge pickup maintains definition and presence while the neck stays articulate and composed during multitrack sessions.
Installation & Power
The included solderless wiring harness eliminates traditional soldering, featuring two 25K volume pots, two 25K tone pots, battery bus, stereo output jack, mounting hardware, and connection cables. System current draw is 160 µA at 9V, yielding approximately 1500 hours of battery life—roughly two years of typical use.
Key Features
- EMG 57 Bridge Pickup – Alnico magnet, 2.11 KHz resonant frequency
- EMG 66 Neck Pickup – Alnico magnet, 1.61 KHz resonant frequency
- Output: 3.00V single string, 4.50V full strum (both pickups)
- Output Noise: -100 dB @ 60 Hz
- Output Impedance: 10 kΩ (both pickups)
- Supply Voltage: 9V DC
- Current Draw: 160 µA @ 9V
- Battery Life: Approximately 1500 hours
- Standard 49mm string spacing
- Short potentiometer shafts (10mm)
- Solderless wiring harness with complete control set included
- Black chrome finish
This set delivers the high-output clarity and low-noise performance EMG is known for, with enough tonal separation between bridge and neck to support both aggressive lead tracking and controlled rhythm work across your session.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 57/66 Set captures tight lows, articulate mids, and punchy highs with -100 dB noise rejection, making it perfect for recording metal, progressive, and hard rock in any mix. The solderless wiring speeds up installation, and the two-year battery life means you can track a full project without power concerns. The bridge and neck frequency split (2.11 KHz vs. 1.61 KHz) ensures vocals and synths won't get buried while your guitar tone stays focused and defined.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Drop Tunings
- ✓ Studio Sessions
Not the best pick for
- – Jazz
- – Folk
- – Blues
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
Do these pickups require soldering to install?
No. The set includes a solderless wiring harness with two 25K volume pots, two 25K tone pots, battery bus, stereo output jack, and all connection cables—no soldering needed.
How long will the battery last?
At 160 µA current draw on a 9V battery, you'll get approximately 1500 hours of typical playing time, or roughly two years before needing a replacement.
What genres and playing styles are these pickups best suited for?
The 57/66 Set excels in metal, hard rock, progressive, and drop-tuning applications. The tight low end and articulate midrange make them less ideal for jazz, folk, or blues.
How do the bridge and neck pickups differ tonally?
The EMG 57 bridge resonates at 2.11 KHz for focused, cutting midrange presence, while the EMG 66 neck peaks at 1.61 KHz for smooth, controlled lows. Both deliver identical output specs (3.00V single string, 4.50V strum) and a -100 dB noise floor.
Are these pickups comparable to other active sets on the market?
The EMG 57/66 is positioned alongside models like the EMG 81/85 Set, Seymour Duncan Blackouts, and Fishman Fluence Modern as a modern, high-output active pickup solution.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $19 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.