EMG 45JCS 6-String Active Soapbar Bass Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG2682
Description
EMG 45JCS 6-String Active Soapbar Bass Pickup in Black
The EMG 45JCS is a compact active soapbar engineered to capture clear, controlled bass tones across dynamic playing styles in the recording environment. Its ceramic magnet construction and solderless wiring system enable quick studio integration, while the preamp delivers responsive, articulate tone with minimal noise floor—essential for producers tracking 6-string bass parts that sit defined and punchy in the mix.
Compact Dimensions & Articulate Midrange Response
At 115.0mm length and 38.1mm width, this pickup integrates into tight bass bodies without routing complications. The 2.61 KHz resonant frequency emphasizes articulate midrange character, translating to recordings with natural definition and clarity that cuts through dense arrangements. Maximum recommended string width of 92.0mm (3.62") accommodates standard 6-string spacing.
Active Electronics & Quiet Output for Clean Recording
The onboard preamp operates on a single 9-volt battery with 3000-hour battery life, reducing maintenance interruptions during recording sessions. Output spans 2.00V (finger/thumb) to 4.50V (thump) with -101 dB output noise, delivering pristine signal capture at all playing dynamics. An 80-microamp current draw and 10 Kohm output impedance provide transparent interface with studio interface inputs and mixing chains.
Key Features
- Ceramic magnets with steel pole pieces
- Solderless wiring system for hassle-free installation
- Length: 115.0mm (4.50"); Width: 38.1mm (1.50")
- Maximum recommended string width: 92.0mm (3.62")
- Resonant frequency: 2.61 KHz
- Output voltage (finger/thumb): 2.00V; Output voltage (thump): 4.50V
- Output noise: -101 dB @ 60 Hz
- Output impedance: 10 Kohm
- Current @ 9V: 80 microamps
- Battery life: 3000 hours on single 9-volt battery
- Maximum supply: 27 Volts DC
- Includes EMG Quik-Connect™ cable, prewired volume/tone control set, output jack, battery clip set, and adjustment screws
This active soapbar captures dependable mid-focused tone with low-noise floor, backed by EMG's solderless architecture and complete accessory complement for fast studio setup.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 45JCS is an active soapbar pickup engineered to capture controlled, articulate bass tones with minimal noise—ideal for tracking funk, progressive, and dense ensemble sessions where clarity in the midrange matters. Its 2.61 kHz resonant frequency centers the response where bass definition cuts through without harshness, and the wide output range (2.00V to 4.50V) adapts to both fingerstyle and aggressive thumb techniques in the mix. Solderless construction and the included control set make integration into your bass setup straightforward, so you spend more time tracking and less time troubleshooting.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Live Performance
- ✓ Funk
- ✓ Progressive
Not the best pick for
- – Traditional Jazz
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What genres and playing styles is this pickup best suited for?
The 45JCS excels in funk, progressive, and live performance contexts where articulate midrange and tight definition are essential. It is not optimized for traditional jazz or folk styles, where warmer, more rounded tone is typical.
Will this pickup fit my 6-string bass?
Yes, the 45JCS is designed specifically for 6-string basses. At 115.0mm long and 38.1mm wide, it fits compact soapbar cavities without extensive routing, and accommodates standard 6-string string width up to 92.0mm (3.62").
How long does the battery last, and what's included in the box?
A single 9-volt battery provides approximately 3000 hours of playing time. The package includes an EMG Quik-Connect cable, prewired volume and tone control set, output jack, battery clip set, and adjustment screws for immediate installation.
How quiet is this pickup, and what's the output range?
The 45JCS delivers a noise floor of -101 dB at 60 Hz, ensuring clean signal even at low volumes. Output voltage ranges from 2.00V in fingerstyle playing to 4.50V with aggressive thumb technique, adapting naturally to your playing dynamics.
Do I need soldering skills to install this pickup?
No. The EMG solderless wiring system and Quik-Connect cable eliminate the need for soldering, making installation straightforward even for players without electronics experience.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.