EMG 40P5-RC 5-String Active Soapbar Bass Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6086
Description
EMG 40P5-RC 5-String Active Soapbar Bass Pickup in Black
The EMG 40P5-RC is a reverse-coil active soapbar pickup engineered to capture articulate, hum-free bass tones in the studio and control room. This ceramic magnet design delivers punchy, focused output with an extremely low noise floor, making it essential for recording sessions where clean signal and midrange clarity define the final mix.
Active Electronics & Recording Performance
Built on EMG's proven active architecture, this pickup maintains an extremely low noise floor of -104 dB at 60 Hz, ensuring pristine signal transmission through your recording chain and preamps. The 3.20 kHz resonant frequency sits in the articulate bass range, cutting through dense mixes while preserving note definition, while output voltages of 2.00V (fingerstyle) and 4.50V (thump) provide dynamic headroom for tracking both subtle playing and aggressive attack. A 9V battery runs the electronics for approximately 3000 hours of playing time.
Installation & Studio Integration
The complete solderless system includes everything needed for immediate integration into your recording bass: a 25k volume pot, 25k tone pot, battery compartment, stereo output jack, and all necessary cables and mounting hardware. Designed specifically for standard 5-string bass string spacing, this pickup fits into most modern soapbar cavities without modification, allowing quick setup and session-to-session consistency.
Key Features
- Reverse-coil configuration for reduced hum and noise
- Ceramic magnet with split/dual coil design
- 4-inch housing length (102mm); 4" × 1.5" overall dimensions; 0.6" height
- Resonant frequency: 3.20 kHz
- Output noise floor: -104 dB @ 60 Hz
- Output impedance: 10 kΩ
- Current draw: 80 microamps @ 9V
- Battery life: approximately 3000 hours
- Maximum supply voltage: 27V DC
- Includes 25k volume and 25k tone potentiometers
- Complete solderless wiring system with cables and connectors
- Optimized for 5-string bass applications
The EMG 40P5-RC combines low-impedance active performance with reverse-coil hum cancellation, delivering the clean, punchy tone that translates reliably from tracking room to mastering chain.
More Information
| Condition | New |
|---|
Reviews
At a Glance
This active soapbar captures articulate midrange clarity and punchy low-end focus, with a noise floor so low (-104 dB) it stays clean even in electrically challenging recording spaces. The 3.20 kHz resonant peak sits perfectly for bass definition in dense mixes, and dual output levels (2V fingerstyle, 4.5V thump) give you recording flexibility without headroom loss. Drop it into your 5-string cavity with the included solderless wiring, and get studio-grade signal integrity.
Who This Is For
| Best suited for | Studio Sessions, Live Performance, Funk, Progressive, Metal |
|---|---|
| Tonal character | Punchy, articulate midrange, low noise, focused output, clean signal |
| Less specialized for | Folk, Jazz (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What does 'reverse-coil' mean, and why does it matter?
Reverse-coil configuration uses opposing coil windings to cancel hum and electrical noise, resulting in that -104 dB noise floor—crucial for clean studio recordings and cutting through live mixes without buzz or hum.
Is this pickup solderless, and what's included?
Yes—the complete solderless system includes a 25k volume pot, 25k tone pot, battery compartment, stereo output jack, cables, and mounting hardware. You can install it without soldering if your bass cavity accepts the preassembled harness.
How long does the 9V battery last?
The battery powers the active electronics for approximately 3000 hours of playing time, meaning several months of regular use before replacement.
Will this fit my 5-string bass?
The 40P5-RC is designed for standard 5-string soapbar cavities with no modification needed in most modern basses; it measures 4 inches long (102mm) and fits into typical soapbar housing.
What tone should I expect, and what styles suit it best?
Expect punchy, articulate midrange with focused output—ideal for funk, progressive, and metal where clarity matters. The 3.20 kHz resonant peak cuts through dense arrangements; jazz and folk players typically prefer warmer, rounder pickups.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.