EMG 40J 5-String Active Bass Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG519
Description
EMG 40J 5-String Active Bass Pickup in Black
The EMG 40J is a compact active pickup engineered to deliver articulate, high-output performance across studio sessions and live recordings. Its single-coil design produces punchy midrange and controlled low end that cuts through dense mixes while maintaining clarity in full-bandwidth recordings. The solderless wiring system and included prewired control set streamline integration into your session bass setup while preserving EMG's signature sonic character.
Tone & Output Characteristics
This active design produces a peak output voltage of 1.10V with a resonant frequency of 4.8 kHz, yielding a focused, articulate response that translates well across modern recording styles. The 0.8V RMS output and -91 dBV output noise specification ensure clean signal transmission to your interface or mixing console with minimal noise floor intrusion, while the 10 kΩ output impedance maintains compatibility with standard audio interfaces and studio monitoring chains.
Installation & Integration
Built for efficient retrofit and setup, the EMG 40J measures 102.0mm (4.00") in length and 38.1mm (1.50") in width, fitting standard 5-string bass routes with a maximum recommended string width of 76.2mm (3.00") and 95.3mm screw spacing. The solderless Quik-Connect cable system and included prewired volume/tone control set, output jack, battery clip, and adjustment screws eliminate wiring complications, getting your instrument session-ready without delays.
Key Features
- Active pickup designed for 5-string electric bass
- Single coil design with ceramic magnet
- Length: 102.0mm (4.00"), Width: 38.1mm (1.50")
- Maximum recommended string width: 76.2mm (3.00")
- Mounting screw spacing: 95.3mm
- Peak output voltage: 1.10V; RMS output voltage: 0.8V
- Resonant frequency: 4.8 kHz; Output impedance: 10 kΩ
- Output noise: -91 dBV; Current @ 9V: 80 µA
- Battery life: 3000 hours; Maximum supply voltage: 27 VDC
- Solderless connections with Quik-Connect cable
- Includes prewired volume/tone control set, output jack, battery clip set, and adjustment screws
- Made in USA; Color: Black
The EMG 40J combines straightforward installation, robust active electronics, and proven EMG reliability into a pickup that delivers professional tracking results without complicated setup procedures.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 40J is an active 5-string bass pickup engineered to cut through dense mixes with a focused, articulate midrange and controlled low end—ideal for modern rock, funk, and studio tracking where clarity and punch matter. Its 1.10V peak output and -91 dBV noise floor deliver a clean, strong signal to your interface with minimal unwanted artifacts, while the 4.8 kHz resonant peak helps your bass lock into the pocket without muddiness. Install it via the solderless system and included prewired controls, then dial in your tone without wrestling with complex wiring.
Who This Is For
Great for
- ✓ Funk
- ✓ Modern Rock
- ✓ Studio Sessions
- ✓ Home Recording
Not the best pick for
- – Traditional Jazz
- – Vintage Tone Aesthetics
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What skill level do I need to install the EMG 40J?
The pickup is designed for intermediate to advanced players and technicians. The solderless Quik-Connect cable system and included prewired volume/tone control set, output jack, and battery clip eliminate traditional soldering, but you'll still need a standard 5-string bass route with 95.3mm screw spacing and a maximum string width of 76.2mm to fit it properly.
How does this pickup handle low-end response?
The 40J features controlled low end and a resonant frequency of 4.8 kHz, which emphasizes midrange punch and clarity over boomy bass. This tuning works well in tight studio mixes and live settings where you need definition, though it is not designed to deliver traditional jazz or vintage warm tones.
What output and noise specs should I expect?
Peak output voltage is 1.10V with 0.8V RMS; output noise measures -91 dBV, ensuring minimal noise floor when feeding your amp or interface. Current draw at 9V is 80 µA, and battery life is rated at 3000 hours.
Is the EMG 40J compatible with my bass?
It fits standard 5-string bass pickups routes with 95.3mm screw spacing, a maximum string width of 76.2mm, and is 102.0mm long by 38.1mm wide. Verify your bass matches these dimensions before ordering.
What's included in the box?
The package includes the active pickup, solderless Quik-Connect cable, prewired volume/tone control set, output jack, battery clip set, and adjustment screws. No soldering iron needed.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.