EMG 35TW-R Active Bass Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG1993
Description
EMG 35TW-R Active Bass Pickup in Black
The EMG 35TW-R is a versatile active bass pickup engineered for recording and mixing flexibility without compromise. Its dual-mode architecture—switchable between single-coil and humbucker configurations via push/pull pot—lets you capture distinct tonal characters within the same session. The compact 3.5-inch housing and 1.50-inch width fit cleanly into most bass bodies while delivering the articulate, transparent response active EMG electronics are known for in the control room.
Tone & Electronics for Recording Clarity
The pickup's dual-mode design yields distinct sonic characters ideal for tracking and layering: single-coil mode produces a punchy 5.4 kHz resonant frequency with output ranging from 1.00 V (finger/thumb) to 3.00 V (thump), while humbucker mode darkens the response to 2.50 kHz with output from 2.00 V to 4.50 V. This tonal breadth, combined with a 25K tone control and -109 dBV output noise floor at 60 Hz, ensures clarity across dynamic playing techniques and ultra-low noise operation for pristine direct recording and blending into complex arrangements.
Power & Studio Reliability
The active circuit draws only 160 µA at 9V, delivering an impressive 1500-hour battery life between changes—essential for uninterrupted session work. Its maximum supply rating of 27 V DC provides headroom for onboard preamp stacking or external power systems, while the 10 kΩ output impedance ensures reliable interfacing with audio interfaces, mixing consoles, and effects chains in the studio environment.
Key Features
- Dual-mode design: switchable single-coil and humbucker configurations via push/pull pot
- Housing dimensions: 3.5 inches (89mm) long, 38.1mm (1.50") wide
- Maximum recommended string width: 2.50"
- Ceramic and steel magnets with EMG preamp circuit
- Single-coil resonant frequency: 5.4 kHz
- Humbucker resonant frequency: 2.50 kHz
- Output voltage range: 1.00 V to 4.50 V depending on mode and playing technique
- Output impedance: 10 kΩ
- Output noise: -109 dBV at 60 Hz
- Current draw: 160 µA at 9V
- Battery life: 1500 hours
- Maximum supply: 27 V DC; includes 25K tone control, push/pull pot, battery bus, stereo output jack, pickup cable, connect cables, battery cable, and mounting screws
The 35TW-R combines tonal flexibility, ultra-low noise performance, and exceptional battery efficiency into a pickup system built for studio precision and session versatility.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 35TW-R gives recording bass players two distinct voices in a single compact pickup: a bright, articulate single-coil mode that cuts through dense mixes, and a warmer humbucker mode for fuller tone on slower material. Its -109 dBV noise floor and switchable character via push/pull pot make it ideal for layering takes or cutting multiple versions in the same session, while the active circuit's 1500-hour battery life means no surprise power loss during a tracking day. Pick it for home and pro studio work when you want tonal flexibility and transparent, high-output capture on every note.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Home Recording
- ✓ Live Performance
- ✓ Touring
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between single-coil and humbucker mode on this pickup?
Single-coil mode produces a punchy, articulate tone centered around 5.4 kHz with output between 1.00 V and 3.00 V, while humbucker mode darkens the response to 2.50 kHz with output from 2.00 V to 4.50 V. You switch between them using a push/pull potentiometer—no tools or hardware swap required.
How long does the battery last, and what kind of power does it need?
The active circuit draws only 160 µA at 9V, delivering approximately 1500 hours of battery life between changes. It also supports up to 27 V DC maximum, so you can stack onboard preamps or use external power supplies if needed.
Will this pickup fit my bass, and what width strings does it handle?
The pickup housing is 3.5 inches long and 1.50 inches wide, fitting cleanly into most standard bass bodies. It is designed for a maximum string width of 2.50 inches, covering standard 4-string and most 5-string configurations.
How noisy is this pickup in a live or studio setting?
The output noise floor is -109 dBV at 60 Hz, which is extremely clean and well-suited to both studio recording and live performance. The active EMG preamp circuit minimizes hum and interference across dynamic playing techniques.
What comes in the box, and will I need extra cables or hardware?
The package includes the pickup, 25K tone control, push/pull pot, battery bus, stereo output jack, pickup cable, connect cables, battery cable, and mounting screws. You'll need a 9V battery and a standard bass amplifier or audio interface to complete the setup.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.