EMG 35DC Active Humbucker Bass Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG655
Description
EMG 35DC Active Humbucker Bass Pickup in Black
The EMG 35DC is a compact active humbucker engineered for four-string bass recording and live tracking. Its ceramic magnet construction and dual-coil design capture articulate, punchy tone with minimal noise—ideal for cutting through dense mixes and maintaining note definition during overdubs. The solderless installation system integrates quickly into your bass signal chain, letting you focus on capturing the performance rather than wrestling with wiring.
Electrical Characteristics & Recording Performance
Rated at 10K DC resistance with a 4.85 kHz resonant frequency, the 35DC produces a 2.00V output in finger/thumb playing mode and 6.00V in thump mode, giving you responsive dynamics across playing techniques that translate clearly to tape or digital audio interface. The active circuitry operates on 9V or 18V power (configurable with included instructions), allowing you to dial in the headroom and gain structure that optimizes your interface preamp and maximizes recording fidelity.
Design & Integration
Measuring 2.63 x 2.38 x 6 inches with a 3.5-inch (89mm) housing length, the pickup fits standard four-string bass routes. The 38.1mm (1.50") width accommodates strings up to 63.5mm (2.50") string width, while stainless steel construction ensures durability and consistent performance across multiple take sessions. Solderless connectivity eliminates complex wiring—the included 6.35mm jack connector interfaces directly with your preamp circuit or audio interface input.
Key Features
- Dual coil ceramic magnet humbucker design
- 10K DC resistance with 4.85 kHz resonant frequency
- Finger/thumb output: 2.00V; thump output: 6.00V
- Active electronics—operates on 9V or 18V power
- Stainless steel construction with ceramic magnets
- Solderless installation system
- 6.35mm jack connector
- Designed for 4-string bass guitars
- String width capacity: up to 63.5mm (2.50")
- Includes 25K volume and tone potentiometers
- Complete with battery bus, stereo output jack, pickup cable, connect cables, battery cable, and mounting screws
The EMG 35DC combines active precision with plug-and-play convenience, enabling quick bass swaps in the studio and reliable tracking performance without extensive electronics work.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 35DC active humbucker captures articulate, controlled bass tone with punchy attack and minimal noise, making it a solid choice for studio sessions where defined low end and dynamic responsiveness matter. Its dual-coil ceramic design and switchable 9V/18V power give you headroom and tonal flexibility in the mix, while solderless installation keeps setup simple and error-free. Pick this if you're recording modern bass parts and need a pickup that sits tight in the mix without coloration.
Who This Is For
Great for
- ✓ Funk
- ✓ Modern Bass Rigs
- ✓ Studio Sessions
- ✓ Live Performance
Not the best pick for
- – Traditional Jazz
- – Vintage Tone Purists
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's included in the box?
The EMG 35DC ships with the pickup, 25K volume and tone potentiometers, battery bus, stereo output jack, pickup cable, connect cables, battery cable, mounting screws, and instructions for 9V or 18V configuration.
Will this fit my four-string bass?
Yes, the pickup is designed for standard four-string bass routes and measures 3.5 inches (89mm) in housing length. It accommodates string widths up to 63.5mm (2.50 inches), and stainless steel construction ensures durability and consistent performance.
What's the difference between finger and thump output modes?
Finger/thumb playing mode delivers 2.00V output for controlled dynamics, while thump mode produces 6.00V for higher output and headroom. This dual-mode response lets you adjust gain and responsiveness to match your playing technique and rig needs.
Do I need soldering experience to install this?
No—the EMG 35DC features a solderless installation system with a 6.35mm jack connector that interfaces directly with your preamp, eliminating complex wiring and making the upgrade straightforward.
Can I run this on 9V or 18V power?
Yes, the active electronics are configurable for either 9V or 18V operation using included instructions, allowing you to dial in the headroom and gain structure that suits your rig and playing style.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.