dbx DI4 Active 4 Channel Direct Box with Line Mixer

Share
Pin it
Login to earn Gear Bucks for sharing!

dbx DI4 Active 4 Channel Direct Box with Line Mixer

In stock

SKU
DBXDI4
No sales tax on orders shipped outside California Most national retailers and online marketplaces now collect sales tax in nearly every state. Shipping outside California keeps roughly 6–10% in your pocket. Learn more
Description

Overview

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all yourk ω yboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.

More Details

Using the dbx Di4 as a DI Box:
Connect the signal you would like to convert from unbalanced to balanced to the Di4 via a 1/4-inch unbalanced jack to one of the channel inputs on the front panel of the unit. Connect an XLR balanced cable to the corresponding channel output on the rear of the Di4 and connect to your chosen destination. If the input signal strength is too high you can depress the 20dB pad. If there is an ground (earth) loop hum you can remove by depressing the earth lift switch.

Using the dbx Di4 as a Line Mixer:
You can mix volume and pan of all input signals to a single stereo pair of RCA connections on the rear of the Di4. This enables use of the unit as a fully functional line mixer. Just connect the RCA stereo master outputs on the rear to your chosen destination and adjust the individual volume and pan controls for each individual channel on the front of the Di4 to suit your needs.

Specifications

Audio Input Connectors 1/4" TS unbalanced
Input Impedance 320k Ohms
Peak Input Level +15 dBu
Headphone Connector 1/4" Jack
Stereo Line Mixer Outputs RCA Connectors
XLR Balanced Outputs XLR Connectors
Output Impedance 600 Ohms
Max Output Level +16 dBu
Frequency Response 20 Hz –20khz ω , 0 dB to -2 dB
THD+Noise 0.0008% typical at +4dBu, 1khz ω
Interchannel Crosstalk <-90dB, 20 Hz –20khz ω
Power Supply ~ 100-120 V AC, ~ 200-240 ω AC, 50-60 Hz
Power Consumption 775 mW
Dimensions 1 3/4" (44.5 mm) x 8" (230.6 mm) x 8 1/2" (217 mm)
Weight Net weight approx. 3.85 lbs. (1.75k ω )
More Information
Condition New
Country of Manufacture China
Reviews
Write Your Own Review
You're reviewing: dbx DI4 Active 4 Channel Direct Box with Line Mixer
Your Rating:
loader
Loading...

You submitted your review for moderation.

At a Glance

The dbx DI4 offers transparent, low-distortion conversion of unbalanced studio sources—synths, drum machines, samplers—into balanced lines suitable for recording consoles and audio interfaces. Its dual role as both DI and stereo line mixer lets you sum and balance multiple keyboard or module outputs into a single stereo pair before tracking, and the headphone output lets you monitor your mix independently during overdubs. Minimal THD and crosstalk keep your recordings clean and phase-coherent.

Who This Is For

Great for

  • ✓ Live Performance
  • ✓ Studio Sessions
  • ✓ Home Recording
  • ✓ Gigging

Skill level: Beginner · Intermediate · Advanced · Professional

Frequently Asked Questions

Can I use the DI4 to mix multiple keyboards and samplers together?

Yes. The DI4 functions as a 4-channel line mixer with individual volume and pan controls on the front panel; mix all four inputs to a stereo RCA pair on the back, letting you consolidate multiple sources into a single balanced output to your mixer or interface.

What if my input signal is too hot or I'm getting ground hum?

The DI4 includes a 20dB pad switch on each channel to handle hot signals and an earth-lift switch to eliminate ground-loop hum, so you can adapt to problem venues or noisy signal chains without degradation.

What connectors does the DI4 have?

Inputs are 1/4-inch unbalanced jacks; XLR balanced outputs are on the rear for each channel, a stereo RCA pair for the line-mixer sum, and a 1/4-inch headphone jack for monitoring.

Is the DI4 suitable for touring and live use?

Yes. At 3.85 lbs and 1U rack depth, it's compact and road-tough; low noise floor (0.0008% THD+Noise typical), transparent tone, and rugged construction make it ideal for gigging musicians and touring engineers.

Can I monitor independently while feeding a separate front-of-house mix?

Yes. The DI4 lets you set independent mixes via its four channel faders and pan controls—send the stereo RCA outputs to your monitor console and the individual XLR outputs to the main PA, each with its own balance.

Do I pay sales tax on this order?

We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $13 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.

Compare With

✨
🎸

Welcome! Before we chat…

Drop your name and email so we can follow up if you reach us after hours.

We never share your info.

✨
🟢 Specialist connected