Crown IT9000HD
Share
- Brand new in original box
- Full Crown manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- IT9000HD-U-USFX
. Description
Crown IT9000HD
The Crown IT9000HD is a high-powered amplifier engineered for demanding studio and post-production monitoring applications. This unit delivers exceptional headroom and processing capability in a chassis built to maintain sonic integrity across extended sessions, making it the choice for control rooms, mastering suites, and multi-channel monitoring systems that demand reliability and precise audio reproduction.
Power & Amplification for Studio Monitoring
Rated at 3500 watts per channel at 4 ohms and 1500W per channel at 8 ohms, the IT9000HD provides ample driving force for active monitor systems and multi-channel studio setups. A damping factor exceeding 5000 (20 Hz to 100 Hz at 8 ohms) ensures tight, controlled low-end response with minimal speaker interaction, critical for accurate mix translation.
Audio Processing & Signal Chain
The integrated BSS OMNIDRIVEHD™ processing engine with Linear Phase FIR filters and LevelMAX™ limiters manages complex monitoring chains and protects equipment during peak transients. 24-bit 192 kHz Cirrus Logic A/D and D/A converters preserve audio fidelity throughout the signal path, while AES/EBU digital input (24-bit, 32–96 kHz with sample-rate conversion) and TCP/IP and HiQnet network connectivity over 100 Mb Ethernet enable flexible studio integration and remote gain management.
Key Features
- 3500 watts per channel at 4 ohms
- 1500 watts per channel at 8 ohms
- Frequency response ±0.25 dB (1 watt, 20 Hz–20 kHz)
- Signal-to-noise ratio greater than 112 dB
- Total harmonic distortion less than 0.1% at full rated power
- Damping factor greater than 5000 (20 Hz to 100 Hz at 8 ohms)
- BSS OMNIDRIVEHD™ processing with Linear Phase FIR filters and LevelMAX™ limiters
- 24-bit 192 kHz Cirrus Logic A/D and D/A converters
- AES/EBU digital input with onboard sample-rate converter (24-bit, 32–96 kHz)
- TCP/IP and HiQnet network control via 100 Mb Ethernet
- LCD control screen for settings, attenuation, muting, error monitoring, and DSP preset recall
The IT9000HD combines raw power, advanced digital processing, and networked control into a platform built to anchor professional monitoring systems with precision and confidence.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown IT9000HD is a professional mastering-grade power amp and DSP hub that brings tour-level precision and processing muscle to large-scale recording facilities and mix suites requiring extreme headroom and transparent amplification for nearfield and midfield monitor systems. The integrated 24-bit 192 kHz Cirrus Logic converters, Linear Phase FIR filters, and network control via HiQnet allow sophisticated integration into complex studio routing and system automation workflows. Ideal for mastering suites, film-mix stages, and critical-listening environments where amplifier distortion must be held below 0.1% and bass response locked to ±0.25 dB across the audible spectrum.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Large Venue Installation
- ✓ Theater/Auditorium Sound
- ✓ Tour Sound Reinforcement
Not the best pick for
- – Home Recording
- – Practice
- – Small Venue/Club
Skill level: Professional
Frequently Asked Questions
What makes the IT9000HD suitable for touring and large venues?
The IT9000HD is rated at 3500 watts per channel at 4 ohms and 1500 watts at 8 ohms, with a damping factor exceeding 5000 to maintain tight, controlled bass across complex speaker loads. Its chassis is built to withstand professional touring environments, and integrated BSS OMNIDRIVEHD processing with LevelMAX limiters provides system protection and remote network control via Ethernet—essential for venues and touring rigs managing multiple speaker zones.
What audio processing is built into the IT9000HD?
The unit features the BSS OMNIDRIVEHD processing engine with Linear Phase FIR filters and LevelMAX limiters, plus 24-bit 192 kHz Cirrus Logic A/D and D/A converters for transparent signal handling. It supports AES/EBU digital input with onboard sample-rate conversion (24–96 kHz) and offers TCP/IP and HiQnet network connectivity for remote operation and preset recall over 100 Mb Ethernet.
How does the IT9000HD compare to other tour-grade amplifiers?
The IT9000HD competes with the Powersoft X Series, QSC CXD Series, and Lab.gruppen C Series in the professional touring amplifier category, delivering comparable power, network control, and integrated DSP. It distinguishes itself through the BSS OMNIDRIVEHD processing, extremely low distortion (under 0.1% at full rated power), and a damping factor exceeding 5000 for precise bass control.
Is the IT9000HD suitable for small venues or home studios?
No; the IT9000HD is engineered specifically for large-venue installations, theaters, touring sound systems, and auditorium reinforcement. It is not recommended for small clubs, home recording, or practice environments where its power, processing, and network features would be underutilized.
What connectivity and control options does the IT9000HD offer?
The unit provides AES/EBU digital input, analog audio inputs, TCP/IP and HiQnet network control via 100 Mb Ethernet, and an onboard LCD screen for settings, attenuation, muting, error monitoring, and DSP preset recall. This enables flexible integration into networked installed systems and remote operation from control surfaces or monitoring stations.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.