Crown DCI8X300DA DCI8X300 Dante
Description
Crown DCI8X300DA DCI8X300 Dante
The Crown DCI8X300DA is a professional-grade eight-channel power amplifier engineered for networked studio and live recording environments where signal integrity and remote DSP control are essential. This unit combines substantial amplification headroom with Dante/AES67 connectivity, eliminating analog cable runs and enabling real-time processing adjustments across your monitoring and recording chain. Built for permanent studio installations, mobile recording setups, and networked monitoring systems, it delivers the processing power and network integration that modern multiroom recording and playback demands.
Amplification & Load Flexibility
Each of the eight channels outputs 300W @ 4Ω, with the amplifier supporting 2/4/8/16 ohm, 70V, and 100V speaker loads through the same output terminals. This multi-impedance architecture means a single unit can drive conventional studio monitors, constant-voltage distributed systems, or mixed speaker configurations without reconfiguration, simplifying headphone amp chains, cue mixes, and multi-room monitor feeds in complex session setups.
Networking & Control Integration
Native Dante/AES67 audio networking eliminates analog snake cables and integrates directly with modern networked audio infrastructures, while HiQnet protocol over standard TCP/IP allows full remote monitoring, DSP control, and audio manipulation from your DAW workstation or control surface. Programmable GPIO ports enable third-party control system integration for monitor level automation, preset recall, and status reporting, making the unit adaptable to existing studio workflow and automation ecosystems.
Key Features
- Eight-channel power amplifier with 300W @ 4Ω per channel
- Native Dante/AES67 networked audio input
- Dante 4.0 firmware support for Dante Domain Manager integration
- HiQnet protocol over TCP/IP for remote monitoring and DSP control
- Support for 2/4/8/16 ohm, 70V, and 100V speaker loads
- High-powered onboard DSP with JBL speaker tunings
- Programmable GPIO ports for volume control and system integration
- EN 54-16 compliant for life safety applications
The DCI8X300DA consolidates networked audio amplification and DSP processing into a single unit, reducing system complexity while delivering the professional-grade performance expected in multiroom recording and monitoring applications.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI8X300DA is a networked power amplifier designed for studios, post-production facilities, and multi-room recording environments where audio distribution and remote DSP control streamline workflow. Eight channels of 300W per channel (into 4Ω) with native Dante/AES67 connectivity eliminate long analog cable runs and integrate directly into modern networked studio infrastructures, allowing you to manage amplification and speaker tuning from your DAW workstation. Multi-impedance support and onboard JBL speaker tunings make it flexible for routing to different studio monitors, nearfields, or surround systems in a single installation.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Touring
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What does Dante/AES67 networking mean for my setup?
Dante is a networked audio protocol that carries all eight channels over a standard Ethernet connection instead of analog snake cables, reducing clutter and enabling remote control via HiQnet over TCP/IP. You can monitor and adjust levels, apply DSP processing, and recall presets from any networked device without physical access to the amp.
Can I use this amp with different speaker impedances at the same time?
Yes. The DCI8X300DA supports 2/4/8/16 ohm, 70V, and 100V loads on the same output terminals, so you can mix passive speakers, constant-voltage systems, and other loads without reconfiguration or separate amplifiers.
Is this amp suitable for touring?
Yes. The DCI8X300DA is built for professional touring, permanent installations, and live venues. Its networked control, multi-impedance flexibility, and EN 54-16 compliance for life safety make it reliable in mission-critical touring and installed sound environments.
What skill level do I need to operate this amp?
This is a professional-grade amplifier intended for experienced sound engineers and installers who are comfortable with networked audio, HiQnet control, and multi-channel DSP management. It is not designed for casual home practice or beginner-level use.
Can I integrate this amp with my building's control system?
Yes. Programmable GPIO ports allow third-party control system integration for volume automation, preset recall, and error reporting, making it compatible with existing building management and AV control ecosystems.