Crown DCI8X300 DCI8X300 Analog
Description
Crown DCI8X300 8-Channel Analog Amplifier
The Crown DCI8X300 is a compact, professional-grade 8-channel amplifier engineered for multi-channel studio and live recording applications. Its 2 RU form factor delivers substantial power density without consuming excessive rack space, making it ideal for home studios and project facilities managing monitor sends, headphone amp matrices, or multi-zone tracking setups. Built on Crown's proven DriveCore Class-D architecture, this amp combines efficiency with reliability in a straightforward, no-nonsense package that stays sonically transparent across demanding tracking and mixing sessions.
Power Delivery & Impedance Flexibility
Each of the eight channels produces 300 watts and operates across multiple impedance configurations—2, 4, 8, and 16 ohms—plus 70V and 100V constant-voltage modes, accommodating virtually any monitor speaker load, studio reference setup, or distributed cueing system. Channels are bridgeable for applications requiring higher single-channel power output, giving you tactical flexibility in monitor mix architecture and session workflows.
Control & Efficiency
Independent channel attenuators provide 0 to -95 dB of level control per channel, enabling precise gain staging for monitor sends and auxiliary feeds without external mixing gear. The rear-panel DIP switch configuration allows per-channel selection of high or low impedance output, simplifying setup when routing to different speaker types or impedance requirements in tracking rooms. An advanced PFC universal power supply accepts 100–240 VAC (50/60 Hz, ±10%), while the auto-standby Powersave mode consumes less than 1W after 30 minutes of inactivity, reducing energy overhead in continuously operational studio rigs.
Key Features
- 8-channel configuration with 300 watts per channel output
- Class-D amplification with Crown DriveCore PWM technology
- Independent per-channel attenuators with 0 to -95 dB range
- Compatible with 2, 4, 8, and 16 ohm impedances
- 70V and 100V constant-voltage operation modes
- Bridgeable channels for higher single-channel power
- Rear-panel DIP switches for high/low impedance selection per channel
- Advanced PFC universal power supply, 100–240 VAC, 50/60 Hz (±10%)
- Auto-standby Powersave mode consuming less than 1W after 30 minutes inactivity
- 2 Rack Unit form factor
The DCI8X300 delivers the efficiency, multi-impedance flexibility, and compact footprint required for professional recording setups where eight independent amplified channels must coexist within strict space and power budgets, from tracking room monitors to cue send matrices.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI8X300 is an 8-channel power amplifier engineered for installed systems and permanent audio deployments, offering 300 watts per channel in a compact 2 RU chassis. Recording and mixing professionals managing distributed studio monitoring, broadcast control rooms, or multi-room playback systems benefit from its transparent Class-D amplification, independent per-channel gain control (0 to -95 dB), and compatibility with any impedance or constant-voltage mode. Its low power draw on standby and efficient architecture make it ideal for always-on session environments where clean, predictable amplification and minimal heat generation matter.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Installed Audio Systems
- ✓ Multi-Zone Distribution
- ✓ Touring
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What impedance loads does the DCI8X300 support?
All eight channels operate across 2, 4, 8, and 16 ohm loads, as well as 70V and 100V constant-voltage modes. Channels are also bridgeable if you need higher single-channel power, giving you tactical flexibility for virtually any speaker configuration.
How much power do I get per channel?
Each of the eight channels delivers 300 watts. When you bridge channels for higher output, you can combine that power for applications requiring fewer, more powerful amplified lines.
Can I control the gain on each channel independently?
Yes, the DCI8X300 includes independent per-channel attenuators with 0 to -95 dB of level control, allowing precise gain staging without requiring an external mixing console. Rear-panel DIP switches also let you select high or low impedance output per channel.
How does the DCI8X300 handle heat and power efficiency?
Its Class-D amplification and Crown DriveCore PWM technology create a low thermal footprint, crucial for compact rack installations. An advanced PFC universal power supply (100–240 VAC, 50/60 Hz) and auto-standby Powersave mode consuming less than 1W after 30 minutes of inactivity keep energy overhead minimal in permanently installed systems.
What form factor does it have?
The DCI8X300 occupies just 2 rack units, delivering substantial power density without consuming excessive space—ideal for touring rigs and rack systems with tight real estate.