Crown DCI4X1250DA DCI4X1250 Dante
Description
Crown DCI4X1250DA DCI4X1250 Dante
The Crown DCI4X1250DA is a professional networked power amplifier engineered for studio-integrated installations, mobile recording setups, and multi-room production environments that demand transparent amplification with centralized digital control. This 4-channel amplifier combines pristine analog amplification with modern Dante networking, making it ideal for mastering suites, distributed monitoring systems, podcast/broadcast studios, or tracking rooms where networked audio routing and remote gain management streamline workflow without compromising signal integrity.
Power & Load Flexibility
Four channels of 1250W @ 4Ω provide clean, headroom-rich amplification for driving reference monitors, surround systems, or distributed speaker arrays across standard impedances and constant-voltage formats. The DCI4X1250DA accepts 2Ω, 4Ω, 8Ω, 16Ω, 70V, and 100V loads, eliminating the need for multiple amplifiers when integrating diverse monitor systems or reconfiguring rooms for different session requirements—stereo tracking, surround mixing, or side-fill reinforcement all run from one amp.
Dante Networking & Session Control
Dante and AES67 networked audio integrate seamlessly into modern DAW-centric studios, while redundant independent Dante ports (Primary and Secondary) ensure signal continuity and failover protection during critical mixing or mastering sessions. On-board DSP with 20 presets, programmable GPIO ports, and network control allow engineers to recall custom EQ/delay configurations, manage output levels, and coordinate multi-room monitoring from the control surface or DAW without leaving the mixing desk.
Key Features
- 4-channel 1250W @ 4Ω power amplifier
- Speaker load support: 2Ω, 4Ω, 8Ω, 16Ω, 70V, and 100V
- Dante and AES67 networked audio capability
- Redundant, independent Dante/AES67 ports accepting 48kHz or 96kHz
- High-powered DSP with JBL speaker tunings
- 48kHz DSP processing with 20 presets
- Input delay up to 2 seconds and output delay up to 100ms
- Programmable GPIO ports for volume control, preset recall, and error reporting
- Universal PFC power supply for global compatibility
- Continuously variable speed forced air cooling with front-to-back airflow
- EN 54-16 compliant for life safety systems
The DCI4X1250DA delivers the combination of transparent amplification, networked flexibility, and preset-driven workflow required for modern multi-room studios and professional recording environments.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI4X1250DA is a professional networked amplifier designed for multichannel studio installs, broadcast facilities, and post-production environments where Dante-networked audio and remote DSP control streamline signal flow across large facilities. Its 20 on-board presets, adjustable delay, and GPIO integration make it ideal for complex recording studios and mixing suites that rely on networked infrastructure and precise gain management. Choose this if you need transparent, low-distortion amplification with modern networked audio integration for a fixed studio installation.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Fixed Installation
- ✓ Touring
- ✓ Large Venue PA
Not the best pick for
- – Home Recording
- – Practice
- – Small Venue Gigging
Skill level: Professional
Frequently Asked Questions
What makes the DCI4X1250DA suitable for touring versus just fixed installations?
Redundant independent Dante ports ensure signal continuity even if one network connection fails during a show, and its support for 2Ω to 100V loads means you can adapt to different venue speaker systems without carrying multiple amplifiers. The universal PFC power supply also works globally, eliminating the need for step-down converters when touring internationally.
Can I control this amplifier remotely, or do I have to adjust it physically?
On-board DSP with 20 presets, programmable GPIO ports, and full network control let you manage processing, delay, and volume from a central control point rather than walking to the amp location. Input delay up to 2 seconds and output delay up to 100ms provide additional timing flexibility for synchronized multi-zone installations.
What speaker loads does this amplifier support?
The DCI4X1250DA accepts 2Ω, 4Ω, 8Ω, 16Ω, 70V, and 100V loads, allowing you to drive passive speakers, constant-voltage systems, and mixed impedance rigs without requiring separate amplifiers or transformers.
Is this amplifier certified for life safety and emergency systems?
Yes, the DCI4X1250DA is EN 54-16 compliant, making it suitable for emergency voice-alarm systems and other safety-critical fixed installations.
What networking options does this amp provide?
Dante and AES67 networked audio capability with redundant, independent Dante/AES67 ports allow integration into modern digital infrastructure, accepting audio at 48kHz or 96kHz sample rates.