Crown DCI2X600N DCI2X600 Network
Share
- Brand new in original box
- Full Crown manufacturer's warranty
- Free shipping in the continental US
Out of stock
- SKU
- DCI2X600N-U-USFX
. Description
Crown DCI2X600N DCI2X600 Network Power Amplifier
The Crown DCI2X600N is a compact, networked power amplifier engineered for studio facilities and production environments where remote monitoring, precise control, and intelligent signal processing are essential. Its 2 RU rackmount footprint and 18.8 lb weight integrate seamlessly into project studios and post-production suites, while the onboard DSP and HiQnet connectivity transform it into an intelligent, centrally managed component that responds to your session needs rather than a passive amplifier.
Power & Performance for Studio Workflows
Delivering 600W per channel across 2, 4, 8, or 16 ohm loads—as well as 70V and 100V distributed systems—the DCI2X600N scales to match small studio setups and larger mastering facilities alike. Thermal dissipation peaks at 549 BTU/hr, allowing sustained operation in confined equipment racks without active cooling requirements, protecting nearby outboard gear from heat stress during long tracking or mixing sessions.
Network Control & Built-In DSP Processing
Real-time monitoring and configuration happen over standard TCP/IP via HiQnet protocol, eliminating the need for dedicated control lines or physical access to the amplifier during critical sessions. The integrated DSP engine handles crossovers, LevelMAX limiting, parametric EQ, delay, matrix mixing, and speaker line monitoring—all configurable remotely and storable in presets for rapid recall across different studio configurations and projects.
Key Features
- 600W output per channel at 2, 4, 8, or 16 ohms
- 600W output per channel at 70V and 100V Vrms
- 2 RU rackmount form factor
- Weight: 18.8 lbs / 8.5 kg
- 15 LED indicators for Bridged Mode, Clip, Fault, Level, Signal, Standby, and Thermal status
- Thermal dissipation: 549 BTU/hr maximum
- BLU Link digital audio transport with RJ45 rear-panel connectors
- Balanced analog inputs
- Onboard DSP with LevelMAX limiters, EQ, delay, matrix mixer, and speaker line monitoring
- HiQnet protocol over TCP/IP for network monitoring and control
- Programmable GPIO ports
- EN 54-16 compliant for life safety applications
The DCI2X600N combines professional-grade amplification with studio-class network control, making it an ideal choice for producers, engineers, and facilities requiring both power density and intelligent remote management in a single compact chassis.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI2X600N is a rackmount power amplifier with integrated DSP, onboard LevelMAX limiting, parametric EQ, matrix mixing, and speaker monitoring—all remotely configurable via Ethernet for centralized studio and facility workflows. Recording engineers and post-production facilities appreciate its clean headroom, low distortion, and preset recall for rapid session setup across different room configurations or client recalls. The networked architecture lets you monitor and adjust amplifier settings, speaker behavior, and DSP chains from a workstation, making it a smart investment for critical-listening spaces and multi-room recording and mastering complexes.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Installed Sound Systems
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What loads and voltage configurations does the DCI2X600N support?
The DCI2X600N delivers 600W per channel across 2, 4, 8, and 16 ohm loads, as well as 70V and 100V distributed systems, making it compatible with both conventional speaker cabinets and installed sound infrastructure.
How do I control and monitor the amplifier remotely?
The DCI2X600N uses HiQnet protocol over standard TCP/IP Ethernet to enable real-time monitoring, remote configuration, and preset storage from any networked control interface. No dedicated control lines or physical rack access are required.
What DSP processing and limiting features are included?
Onboard DSP includes LevelMAX limiters, parametric EQ, crossovers, delay, matrix mixing, and speaker line monitoring—all programmable via HiQnet and storable in presets for rapid deployment across venues.
Is the DCI2X600N suitable for permanent installation?
Yes. It is EN 54-16 compliant for life safety applications and designed specifically for installed sound systems. Its 2 RU rackmount form factor, low weight (18.8 lbs), and efficient thermal dissipation (549 BTU/hr maximum) allow it to integrate into confined spaces without active cooling.
How does the DCI2X600N compare to passive power amplifiers?
Unlike passive amps, the DCI2X600N combines amplification with integrated DSP processing, LevelMAX limiting, speaker monitoring, and network control—eliminating the need for external processors, signal conditioners, and physical access to the rack for adjustments.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.