Crown DCI2X300N DCI2X300 Network
Description
Crown DCI 2|300N Network Amplifier
The Crown DCI 2|300N is a compact, rackmountable network amplifier designed for studio monitoring chains and professional recording facilities where digital control and networked operation streamline session workflows. This two-channel powerhouse delivers consistent, reliable amplification with integrated DSP processing and remote management capabilities via standard TCP/IP networks. The compact form factor and flexible I/O options make it ideal for multiroom monitoring setups, distributed studio architectures, and systems requiring centralized network-based control and processing.
Amplification & Power Delivery
The DCI2X300N outputs 300W per channel across 2, 4, 8, or 16 ohm loads, as well as 70V and 100V constant-voltage configurations—covering virtually any studio speaker load from intimate nearfield monitors to larger full-range systems. This power output remains stable and consistent, ensuring predictable headroom and transparent monitoring whether tracking in a control room or calibrating a multiroom monitoring network.
Network Integration & DSP Control
Digital audio arrives via BLU Link over rear-panel RJ45 connectors, while HiQnet™ protocol enables full remote control and monitoring across standard TCP/IP networks without requiring proprietary cabling. Built-in DSP processing includes limiting, input/output EQs, delay, and matrix mixing, allowing complex signal routing, room correction, and session-specific processing directly in the amplifier rather than requiring external outboard gear.
Key Features
- 300W per channel at 2, 4, 8, or 16 ohms; 70V and 100V RMS configurations
- 2-channel network amplifier with integrated BLU Link digital audio transport
- Digital inputs via rear-panel RJ45 connectors
- Balanced analog inputs plus BLU-Link digital audio connectivity
- HiQnet™ protocol network control over standard TCP/IP
- Built-in DSP: limiting, input/output EQs, delay, and matrix mixer
- Programmable GPIO ports for integration with control systems
- Rack-mountable design for 19" equipment racks
- Universal AC input: 100–240 VAC, 50/60 Hz (±10%)
- Auto-standby powersave mode (less than 1W after 30 minutes idle)
- EN 54-16 compliant for life safety applications
The DCI2X300N combines robust amplification, networked control, and professional-grade DSP in a single compact unit, making it an intelligent choice for modern multiroom monitoring and networked studio workflows.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown DCI 2|300N is a professional two-channel network amplifier with 300W per channel, integrated DSP processing, and remote management via TCP/IP—designed for fixed installations and distributed systems where digital control and stable, consistent amplification matter. Studio engineers and installed-system designers value its onboard DSP (EQ, limiting, delay, matrix mixing), flexible I/O (BLU Link digital and analog), and ability to handle any speaker impedance from 2 ohms to 100V constant-voltage. Choose it to consolidate amplification and processing into a single compact, networkable unit that integrates seamlessly with modern control architectures.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Fixed installations
- ✓ Distributed audio systems
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What audio inputs does the DCI2X300N accept?
The unit features balanced analog inputs and BLU Link digital audio connectivity via rear-panel RJ45 connectors. Digital audio transport uses BLU Link protocol, while HiQnet™ protocol enables remote control and monitoring over standard TCP/IP networks.
What speaker loads and impedances can this amplifier drive?
The DCI2X300N delivers 300W per channel across 2, 4, 8, or 16 ohm loads, as well as 70V and 100V constant-voltage configurations, making it suitable for nearly any professional speaker setup from nearfield monitors to line arrays.
What DSP features are built into this amplifier?
Onboard DSP includes limiting, input and output EQs, delay, and matrix mixing, allowing complex signal routing and processing directly in the amplifier without external processors.
Is the DCI2X300N suitable for life-safety applications?
Yes, the unit is EN 54-16 compliant, meeting standards for emergency and life-safety audio systems in fixed installations.
How does network control work with this amplifier?
HiQnet™ protocol enables full remote control and monitoring across standard TCP/IP networks, and programmable GPIO ports allow integration with control systems—no proprietary cabling required.