Crown DCI2X2400N DCI2X2400 Network
Share
- Brand new in original box
- Full Crown manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- DCI2X2400N-U-USFX
. Description
Crown DCI2X2400N DriveCore Install 2|2400 Network Amplifier
The Crown DCI2X2400N is a compact, rackmount network amplifier engineered for professional recording facilities and studio installations where networked mixing, remote DSP control, and transparent amplification are critical to session workflow. This 2-channel powerhouse delivers 2400W per channel across standard impedance loads and voltage configurations, making it ideal for tracking rooms, live recording setups, broadcast facilities, or distributed studio monitoring systems where networked control and integrated DSP processing streamline the production environment.
Power & Audio Performance
2400W per channel at 2, 4, 8, or 16 ohms—or 70/100V rms—provides clean, reliable headroom for studio monitor systems and recording applications while maintaining exceptional audio transparency. The amplifier achieves ±0.25dB frequency response (20Hz–20kHz at 8Ω) and 0.35% THD at full rated power, ensuring your mixes translate accurately across the entire audible spectrum with minimal coloration. A damping factor exceeding 5000 (20Hz–100Hz) yields precise, controlled bass response that captures the true character of your speakers and lets you hear what's actually on the track.
Networking & DSP Control
Native BLU Link digital audio transport via rear-panel RJ-45 connectors eliminates analog cable runs and integrates seamlessly into networked studio environments. HiQnet protocol over TCP/IP enables real-time remote monitoring, gain adjustment, and audio processing from any connected workstation, while onboard DSP capabilities include limiting, parametric EQs, delay, and a matrix mixer for creative signal routing and studio-grade processing without consuming rack space or adding latency.
Key Features
- 2-channel configuration with 2400W output per channel
- Compatible output impedances: 2Ω, 4Ω, 8Ω, 16Ω, 70Vrms, 100Vrms
- Frequency response ±0.25dB (8Ω, 20Hz–20kHz)
- Total harmonic distortion 0.35% at full rated power (20Hz–20kHz)
- Damping factor >5000 (20Hz–100Hz)
- BLU Link digital audio transport via RJ-45 networking
- HiQnet protocol control and monitoring over TCP/IP
- Built-in DSP: limiting, input/output EQs, delay, and matrix mixer
- Channel-independent impedance selection via rear-panel DIP switches
- Programmable GPIO ports for volume control, preset recall, and error reporting
The DCI2X2400N combines professional-grade amplification, networked intelligence, and onboard processing into a single chassis, making it the authoritative choice for studios that demand reliability, remote manageability, and transparent audio performance across recording and monitoring applications.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | Mexico |
Reviews
At a Glance
The Crown DCI2X2400N is a professional 2-channel network amplifier that delivers transparent, high-headroom power (2400W per channel) with exceptional audio fidelity—ideal for studio sessions, fixed recording installations, and networked monitoring setups. Its built-in DSP suite (parametric EQ, limiting, delay, matrix mixer) provides production-grade processing without external gear, while BLU Link digital audio and HiQnet remote control integrate seamlessly into modern networked studio environments. Choose this amp when you need pristine amplification with onboard intelligence for reliable, transparent tracking and playback in professional recording spaces.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Worship
- ✓ Fixed Installation
Skill level: Professional
Frequently Asked Questions
What impedances and voltage outputs does the DCI2X2400N support?
The amp is compatible with 2Ω, 4Ω, 8Ω, and 16Ω loads, as well as 70Vrms and 100Vrms outputs. Channel-independent impedance selection via rear-panel DIP switches lets you configure each channel independently for different speaker systems.
Can I control and monitor this amp remotely?
Yes. The DCI2X2400N uses HiQnet protocol over TCP/IP to enable real-time monitoring, remote control, and audio manipulation from any networked device. BLU Link digital audio transport via RJ-45 connections simplifies networked integration without analog cables.
What DSP processing is built into the DCI2X2400N?
The onboard DSP includes limiting, parametric input/output EQs, delay, and a matrix mixer for flexible signal routing and processing. These tools eliminate the need for external outboard gear in fixed installations.
How transparent is the audio quality at full power?
The amp achieves ±0.25dB frequency response (20Hz–20kHz at 8Ω) and 0.35% THD at full rated power, with a damping factor exceeding 5000 (20Hz–100Hz) for tight, controlled bass and distortion-free reproduction across the entire spectrum.
Is this amp suitable for houses of worship and conference centers?
Yes. The DCI2X2400N is built specifically for fixed installations in houses of worship, conference centers, theaters, and distributed audio systems where reliable, remotely manageable power and networked control are non-negotiable.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $496 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.