Crown CRN-CTD-2125-US Ct 2X125W Dante Amp Us Ver
- Brand new in original box
- Full Crown manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- CRN-CTD-2125-US
Description
Crown CRN-CTD-2125-US CT 2×125W Dante Amplifier
The Crown CT 2×125W Dante is a compact networked power amplifier built for studio and production environments where Dante audio networking and integrated DSP processing streamline signal flow. Its 1RU, ½ rack width chassis slots efficiently into any studio rack setup, delivering clean amplification with built-in room tuning and real-time monitoring accessible via web interface—ideal for multiroom recording sessions, broadcast facilities, or networked monitoring systems.
Amplification & Power Delivery
Rated at 125 watts per channel with 250W total power sharing between two channels in any ratio, this amplifier adapts to diverse studio monitoring configurations without requiring manual bridging. The dual-channel architecture supports independent or dependent operation, making it flexible for stereo control room monitoring, cue systems, or distributed studio playback across multiple rooms.
Dante Networking & DSP Control
Native Dante connectivity with redundant ports eliminates analog cable runs from console to amp, keeping signal chain clean and reducing ground loop issues. Built-in DSP provides room equalization and speaker tuning directly in the amplifier, while factory JBL SpeakerTunings are pre-loaded for select JBL monitoring models. The web configuration interface grants full remote control and session monitoring from any networked device, essential for complex studio environments.
Key Features
- 125 watts per channel; 250W total power sharing
- 1RU, ½ rack width form factor
- 2 analog inputs on Euroblock connectors
- 2×2 Dante inputs and outputs with redundant ports
- Built-in DSP for room and speaker tuning
- Factory JBL SpeakerTunings for compatible models
- Lo-Z/Hi-Z input switching
- 40 preset storage capacity
- 4 GPIO terminals for system integration
- Health, pilot tone, and load monitoring
- Fault output for alarm integration
- Web-based configuration interface
The Crown CT Dante delivers professional-grade amplification with the Dante networking and integrated DSP demanded by contemporary studio and production workflows.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown CT 2×125W Dante is a professional networked amplifier designed for studios and control rooms that use Dante-based workflows and distributed audio systems. Its built-in DSP, room equalization, and factory JBL speaker tunings let you dial in transparent amplification tailored to your acoustic space, while redundant Dante ports and remote web control streamline session setup and monitoring. Choose it when your recording or mixing chain demands networked signal routing, intelligent processing, and the clean, low-distortion amplification that transparent studio monitoring requires.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ installed sound systems
- ✓ distributed audio networks
Not the best pick for
- – home practice
- – portable gigging
Skill level: Professional
Frequently Asked Questions
What's the difference between this and a standard power amp?
This amplifier integrates Dante networking, built-in DSP, and room tuning directly into the signal chain, eliminating the need for external processing and analog cabling. Standard amps deliver power only; the CT adds networked intelligence, remote configuration, and adaptive tuning via web interface.
Can I use this for stereo or zone-based audio?
Yes. The dual-channel design supports independent or dependent operation, so you can run stereo distributed systems, dual-mono zones, or flexible load sharing—all without manual bridging. Each channel delivers up to 125W, with 250W total power available.
Does it work with JBL speakers?
The amplifier ships with factory JBL SpeakerTunings pre-loaded for select JBL models, which automatically optimize DSP processing for those cabinets. You can also configure custom tuning via the web interface for other speaker types.
How do I control it remotely?
A web-based configuration interface accessible from any networked device grants full remote control, monitoring, and preset management. The amplifier also includes GPIO terminals for system integration and fault output for alarm triggering.
What connections does it have?
The amplifier includes 2 analog inputs on Euroblock connectors, redundant 2×2 Dante ports for audio networking, and GPIO and fault-output terminals for system monitoring and integration.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.