Crown CDi2x600 2x600W Power Amplifier
Description
Crown CDi2x600 2x600W Power Amplifier
The Crown CDi2x600 is a compact, networked power amplifier engineered for studio monitoring, live tracking, and high-fidelity playback applications. Built on Crown's proprietary DriveCore technology, this amp delivers professional-grade reliability and precise power management in a format that integrates seamlessly into modern recording and mixing environments.
Power Output & Sonic Performance
This amp produces 600W per channel at 4 ohms and 8 ohms in dual-channel mode, with bridge-mono capability reaching 1200W at 8 and 16 ohms—sufficient headroom for demanding monitor systems and speaker arrays. The 104dB signal-to-noise ratio and 0.35% THD across the full 20Hz–20kHz bandwidth ensure transparent, uncolored amplification critical for accurate monitoring during tracking and mixing sessions.
Studio Control & Remote Management
Network-based monitoring and control via HiQnet Audio Architect software allows real-time management over TCP/IP, enabling engineers to adjust levels and diagnostics from the console or control room without leaving the mixing position. The integrated front-panel interface and high-level DSP provide flexible gain staging and configuration for diverse studio setups, from dedicated control rooms to mobile recording rigs.
Key Features
- 2-channel analog power amplifier with bridge-mono capability
- Rated power output: 600W @ 4Ω, 600W @ 8Ω in dual-channel mode
- Bridge mono: 1200W @ 8Ω, 1200W @ 16Ω
- Load impedance: 2–16Ω (dual mode); 4–16Ω (bridge mono); 70Vrms and 100Vrms compatible
- Sensitivity: 0.7V RMS for full rated power at 8 ohms
- Signal-to-noise ratio: >104dB (referenced to rated power, 20Hz–20kHz)
- Total harmonic distortion: 0.35% (full rated power, 20Hz–20kHz)
- Crown DriveCore technology for reduced component count and improved reliability
- Network control and monitoring via HiQnet Audio Architect software
- TCP/IP connectivity for remote management and diagnostics
- Integrated DSP with high-level processing capabilities
- Front-panel interface for local configuration and monitoring
The CDi2x600 combines proven Crown engineering with modern networked control, delivering the power, transparency, and remote manageability required for professional studio monitoring and recording applications.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown CDi2x600 delivers 600W per channel of transparent, neutral amplification for studio monitoring, mastering playback, and session work where accuracy and low distortion (0.35% THD, 104dB SNR) are non-negotiable. Its bridge-mono mode pushes 1200W for larger control-room setups, and integrated DSP with HiQnet network control lets you dial in the exact configuration your monitoring chain demands. For producers and engineers who trust their mixes only to transparent, coloration-free power, this amp provides the headroom and precision to do it right.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ installed sound systems
Not the best pick for
- – home practice
- – bedroom recording
Skill level: Professional
Frequently Asked Questions
Can this amp handle different speaker impedances, and what's the power output at each?
Yes. In dual-channel mode, it delivers 600W at both 4Ω and 8Ω. In bridge-mono mode, it produces 1200W at 8Ω and 1200W at 16Ω. It also supports 70V and 100V line compatibility for installed systems.
How is this amp controlled and monitored in a live or installed setting?
It features network-based control via HiQnet Audio Architect software over TCP/IP, allowing real-time remote management from your console or control point without physical access to the amp. A front-panel interface is also available for local configuration.
Is this amp transparent enough for critical monitoring and mastering?
Yes. It delivers 0.35% THD across 20Hz–20kHz and a 104dB signal-to-noise ratio, with a neutral, low-coloration character that preserves the integrity of your mix and monitoring chain.
What speaker loads can this amplifier safely drive?
In dual-channel mode, it can drive 2–16Ω loads; in bridge-mono mode, 4–16Ω loads. It is also rated for 70V and 100V distributed systems used in many installed sound applications.
Is this amp suitable for both permanent installations and touring applications?
Yes. Its compact design, proven DriveCore reliability, and remote TCP/IP management make it ideal for permanent installs, temporary deployments, and live touring where you need professional power without unnecessary bulk.