Crown CDi2x1200 2x1200 Power Amplifier B-Stock
In stock
Only 1 left
- SKU
- NCDI2X12-U-US-B
Description
Crown CDi2x1200 2-Channel Power Amplifier
The Crown CDi2x1200 is a compact, rack-mount power amplifier engineered for professional installations and live sound applications. Its lightweight design and efficient thermal management make it easy to deploy in touring rigs, fixed installations, and rental inventories without sacrificing raw amplification muscle.
Power & Amplification
This amp delivers 1200W per channel at 4 ohms, with the flexibility to run 70/100V, 4/8 ohm loads—eliminating the need for external step-up transformers and simplifying system design. The 0.7V RMS sensitivity and damping factor exceeding 1000 ensure tight, controlled speaker response across the frequency spectrum.
Audio Performance & Control
Distortion remains negligible at 0.35% THD across the audible range, while the 104dB+ signal-to-noise ratio and 80dB+ crosstalk rejection deliver clean amplification with minimal noise floor. Onboard DSP and network control allow remote monitoring and tuning, with pre-loaded JBL speaker voicings for seamless integration into existing systems.
Key Features
- 1200W rated power output per channel @ 4 ohms
- 2-channel design with balanced (20 kΩ) and unbalanced (10 kΩ) XLR/RCA inputs
- 70/100V and 4/8 ohm impedance support
- 0.7V RMS sensitivity for full rated power at 8 ohms
- 0.35% THD (20 Hz – 20 kHz at full rated power)
- Frequency response ±0.25dB (8Ω, 20 Hz – 20 kHz)
- Signal-to-noise ratio > 104dB (ref. rated power, 20 Hz – 20 kHz)
- Damping factor > 1000 (20 Hz to 100 Hz)
- Crosstalk rejection > 80dB (20 Hz to 1 kHz)
- Onboard DSP with network control and monitoring
- Pre-loaded JBL speaker tunings
- 19" rack-mount format (3.5"H × 14.71"D)
The CDi2x1200 combines professional-grade amplification, network integration, and versatile impedance handling into a compact platform built for demanding production environments.
More Information
| Condition | Refurbished |
|---|
Reviews
At a Glance
The Crown CDi2x1200 is a 2-channel power amplifier purpose-built for studio monitoring, session playback, and fixed recording-room installations where clean, controlled amplification matters. Its 0.35% THD distortion floor, 104dB+ signal-to-noise ratio, and damping factor exceeding 1000 ensure monitor mixes and reference speakers stay tight and transparent across long mixing and mastering sessions. Onboard DSP with pre-loaded speaker tunings streamlines system calibration, and network control lets you adjust monitoring levels and EQ from your DAW setup without leaving the console.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Touring
- ✓ Fixed Installations
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What does B-Stock mean for this amplifier?
B-Stock means the unit is fully functional and carries the same specifications and warranty as new, but may have minor cosmetic imperfections from display or handling. No impact on sound quality or reliability.
Can I run this amp with my existing 70V distributed system without extra transformers?
Yes. The CDi2x1200 supports 70/100V loads natively, so you can wire it directly to a 70V line without step-up transformers, simplifying your install and reducing cost and signal loss.
What's the difference between this and the Behringer NX3000 or QSC RMX 5050?
The CDi2x1200 delivers 1200W per channel with 0.35% THD, a damping factor over 1000, and integrated DSP with network control and JBL speaker voicings. It's engineered for venues and touring rigs that demand transparent, high-headroom amplification with remote monitoring built in.
Does this amp have onboard EQ or speaker tuning presets?
Yes. The CDi2x1200 includes onboard DSP, network control, and pre-loaded JBL speaker tunings, so you can dial in your monitor or PA speakers without external processors.
Is this suitable for home recording or a small practice space?
No. This is a professional-grade touring and installation amplifier designed for live sound, rental inventories, and fixed installations. For home recording and practice, consider a smaller, more compact amp.
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.