Cinema NXLC21300-0-US 2 x 1300W at 4Ω Amplifier
- Brand new in original box
- Full Cinema manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- NXLC21300-0-us
Description
Crown Audio NXLC21300-0-US 2-Channel Power Amplifier
The Crown NXLC21300 is a compact, rack-mountable power amplifier engineered for studio tracking, live tracking, and integrated audio production environments. Its efficient forced-air cooling and dual-channel design deliver robust power handling without excessive heat generation, making it reliable for extended session work and permanent studio installations. This unit bridges easily into mono configuration for subwoofer arrays and other high-power monitoring applications.
Power & Performance Specifications
Rated at 1,300W per channel at 4Ω and 1,000W at 8Ω, the NXLC21300 offers 2,700 watts in bridged mono mode for systems requiring single-channel power. Distortion remains minimal across the audio spectrum with THD below 0.5% from 20 Hz to 20 kHz, while the signal-to-noise ratio exceeds 100 dB—delivering clean, articulate amplification for critical recording and monitoring applications.
Connectivity & Studio Integration
Input options include a 6-pin Phoenix female connector and HD-15 female connector, accommodating both analog professional audio signals and digital control inputs. Outputs terminate to a 4-pin barrier strip for direct speaker connection. Built-in diagnostics monitor amp and speaker loading on third-party control and TMS systems, enabling seamless integration into networked studio installations and remote monitoring setups.
Key Features
- 1,300W @ 4Ω; 1,000W @ 8Ω stereo; 2,700W bridged mono
- 2 channels with stereo, dual input Y, and bridged mono output modes
- 36 dB voltage gain
- Input sensitivity: 1.4V @ 4Ω
- Signal-to-noise ratio: greater than 100 dB
- THD: less than 0.5%, 20 Hz–20 kHz
- Load impedance: 4–8Ω per channel stereo; 8Ω bridged
- Input connectors: 6-pin Phoenix female and HD-15 female
- Output connectors: 4-pin barrier strip
- Front-panel Power, Signal, Clip, Bridged Output, and Fault LED indicators
- Rear-panel volume control
- Forced-air cooling and built-in diagnostics for third-party control systems
The Crown NXLC21300 combines exceptional power density, low distortion, and system flexibility—ideal for home studios, project facilities, and applications where transparent amplification and remote monitoring drive tracking and mixing sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Crown NXLC21300 delivers 1,300W per channel of exceptionally clean amplification—perfect for tracking, mixing, and mastering sessions where you need transparent, high-headroom power without coloration. Its distortion stays below 0.5% across the full spectrum, and the signal-to-noise ratio exceeds 100 dB, making it ideal for critical studio monitoring, powered speaker systems, or any scenario where low-noise, artifact-free amplification supports your mix chain. Compact 2U format fits standard racks and supports flexible stereo or bridged mono configurations.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Touring
- ✓ Studio Sessions
Not the best pick for
- – Home Recording
- – Practice
Skill level: Professional
Frequently Asked Questions
What impedance loads can this amplifier handle?
The NXLC21300 operates at 4–8Ω per channel in stereo mode and 8Ω in bridged mono mode. At 4Ω it delivers 1,300W per channel; at 8Ω it delivers 1,000W per channel. In bridged mono configuration you get 2,700W into 8Ω.
Can I use this amp for a subwoofer array?
Yes. The amp bridges easily into mono configuration, delivering 2,700 watts single-channel output ideal for powering subwoofer arrays and other high-power mono applications.
How clean is the audio output?
Total harmonic distortion stays below 0.5% from 20 Hz to 20 kHz, and the signal-to-noise ratio exceeds 100 dB, ensuring transparent, articulate amplification with minimal noise floor.
Can this amp integrate into a networked audio system?
Yes. Built-in diagnostics and third-party control system compatibility allow you to monitor amp and speaker loading and set up remote monitoring across networked installations.
What input and output connectors does it have?
Inputs use a 6-pin Phoenix female connector and HD-15 female connector for analog audio and digital control. Outputs terminate to a 4-pin barrier strip for direct speaker connection.
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.