Antelope Audio Edge Go USB2/USB-C Condenser Modeling Mic
Share
In stock
Only 1 left
- SKU
- Edge-Go
. Description
Antelope Audio Edge Go USB2/USB-C Condenser Modeling Mic
The Edge Go is a studio-grade large-diaphragm condenser microphone that functions as a complete recording interface—no external preamp, mixer, or audio interface required. Its compact form factor and bus-powered USB-C connectivity make it an exceptionally portable solution for professional-quality recordings in any studio environment, while dedicated FPGA processing built into the microphone body delivers real-time mic modeling and effects without taxing your computer's CPU during critical tracking and overdub sessions.
Audio Performance & Design
Built with the same dual-diaphragm capsule technology as Antelope's flagship Edge Duo, the Edge Go captures audio at 192 kHz/24-bit resolution via USB output—far exceeding typical USB microphone fidelity. The large-diaphragm condenser design provides a flat response from 20 Hz to 20 kHz in transparent unmodeled mode, with a maximum SPL of 116 dB, allowing you to track everything from intimate vocals and acoustic instruments to loud drums and amplifiers with clean, undistorted capture.
Modeling & Real-Time Processing
The Edge Go includes 18 real-time microphone emulations modeled after iconic studio mics—fat-sounding tube designs like the Berlin 49T and Vienna 12, crisp FET condensers, and smooth ribbons—plus 20 built-in real-time effects including preamps, compressors, EQ, reverb, and tape saturation. All processing runs on dedicated 1x DSP and 1x FPGA hardware inside the microphone, leaving your computer free for recording and mixing without the latency or CPU overhead of plugin-based processing.
Key Features
- Large-diaphragm condenser microphone with double-sided 6µ gold-sputtered membranes
- 192 kHz/24-bit USB output via USB-C connectivity
- Bus-powered via USB (no external power supply or 48V phantom power required)
- Maximum SPL of 116 dB
- Flat frequency response 20 Hz – 20 kHz in transparent unmodeled mode
- 18 real-time microphone emulations (Berlin 47 FT, Berlin 49T, Vienna 12, Vienna 414, Tokyo 800T, Oxford 4038, Sacramento 121R, and more)
- 20 built-in real-time effects including AuraVerb reverb, preamps, compressors, EQ, and reel-to-reel tape modeling
- Integrated 1x DSP and 1x FPGA processing for zero-latency real-time effects without CPU load
- 3.5mm stereo headphone jack for zero-latency monitoring directly on the microphone
- Includes rugged shockmount, adjustable pop filter, desktop mount, and portable hard case
- Multi-pattern polar selection (cardioid, figure-8, omnidirectional)
- Backwards compatible with USB 2.0
The Edge Go combines Antelope's legendary A/D conversion and FPGA processing expertise with unprecedented mic-modeling access, delivering a complete professional recording solution that adapts to your studio's evolving tracking and production demands.
More Information
| Condition | New |
|---|---|
| Connection | Wired |
Reviews
At a Glance
The Edge Go is a large-diaphragm condenser mic that acts as a complete recording interface, delivering 192 kHz/24-bit resolution and a flat, transparent frequency response ideal for capturing vocals, spoken word, and acoustic sources with pristine detail. Its built-in FPGA processor runs 18 real-time mic models (vintage tube, ribbon, and FET designs) and 20 effects—preamps, compressors, EQ, reverb, tape saturation—without loading your DAW, so you can experiment with tone shaping and character during tracking or keep it neutral for post-production flexibility. This is the portable, all-in-one solution for bedroom studios and traveling musicians who need professional results without external preamps or interfaces.
Who This Is For
Great for
- ✓ Home Recording
- ✓ Studio Sessions
- ✓ Podcasting
- ✓ Vocal Recording
- ✓ Instrument Recording
Not the best pick for
- – Live Performance
- – Stage Use
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What does 'modeling' mean, and how does it work on the Edge Go?
The Edge Go includes 18 real-time emulations of classic studio microphones—including tube mics like the Berlin 49T and Vienna 12, crisp FET condensers, and smooth ribbons. All modeling runs on dedicated DSP and FPGA hardware built into the microphone itself, so you can switch between sounds and apply effects like preamps, compressors, EQ, and tape saturation without burdening your computer's CPU.
Do I need an external audio interface or preamp?
No. The Edge Go is a complete recording interface in one unit—it connects directly to your computer via USB-C, is bus-powered (no external power supply needed), and outputs 192 kHz/24-bit audio, eliminating the need for an external interface, preamp, or mixer.
Can I use the Edge Go for podcasting and vocal recording?
Yes. The Edge Go is purpose-built for home recording, studio sessions, podcasting, and vocal work. Its large-diaphragm condenser capsule delivers a flat, transparent response from 20 Hz to 20 kHz, and its maximum SPL of 116 dB handles both intimate vocal performances and louder spoken-word content.
What polar patterns does it support?
The Edge Go offers cardioid, figure-8, and omnidirectional polar patterns, giving you flexibility to reject room noise, capture ambient sources, or isolate a source depending on your recording need.
Is the Edge Go portable, and what's included?
Yes—its compact form factor and USB-C connectivity make it ideal for travel and portable recording. The package includes a rugged shockmount, adjustable pop filter, desktop mount, and a hard carry case, so you have everything needed to record professionally anywhere.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.