AMX PC1 1 Switched Outlet, contact closure input
Description
AMX PC1 1 Switched Outlet Power Controller
The AMX PC1 is a compact, rackmount-ready power control unit designed for studio engineers and producers managing multiple audio devices. Its straightforward front-panel operation and remote-control capability make it an essential tool for home studios, project studios, and recording rigs where reliable power switching is non-negotiable.
Power Handling & Output
This unit delivers a single switched 3-wire socket rated for 110 VAC at 1200 watts total capacity, with an internal 10A load fuse protecting connected equipment. The substantial wattage headroom accommodates powered monitors, amplifiers, and other demanding audio gear without compromise.
Control & Integration
Remote control is handled via contact closure input through a rear-panel 4-pin captive-wire connector, allowing seamless integration into larger automation systems or control networks. A DIP switch on the unit enables customizable switch closure modes, and the front-panel AC1 pushbutton with status LED provides manual override and visual feedback at a glance.
Key Features
- 1 switched 3-wire socket outlet
- 110 VAC output
- 1200 watts total power capacity
- Internal 10A load fuse
- 105–125 VAC input range
- 3 watts maximum input draw
- Remote control contact closure input
- DIP switch for customizable switch closure mode
- AC1 pushbutton on/off with status LED indicator
- Metal enclosure with black matte finish
- Compact dimensions: 1.5" H × 5.5" W × 5.5" D
- 6 ft. grounded power cord included
Built for reliability in recording environments, the PC1 combines straightforward manual operation with flexible remote control for studios where power management demands both simplicity and precision.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The AMX PC1 is a single-outlet power controller designed for professional studios and control installations where you need to remotely switch power to studio monitors, outboard gear, or other audio equipment from a central control point or automation system. Its 1200-watt capacity handles demanding powered monitors and amplifiers, while the contact closure input lets you integrate it into studio automation workflows without complicated wiring. Use it to add intelligent power management to your control rack, ensuring equipment powers up and down in sync with your session cues.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Studio Sessions
- ✓ Install Audio
- ✓ Touring
Not the best pick for
- – Practice
- – Home Recording
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What is contact closure input and how do I use it?
Contact closure input is a remote-control method that uses a 4-pin captive-wire connector on the rear panel to trigger the outlet on and off from an external device or control system. The DIP switch on the unit lets you customize the switch closure mode to match your automation system's requirements, and a manual AC1 pushbutton on the front provides backup on/off control with an LED status indicator.
Will this power my live rig or studio setup?
Yes. The PC1 is rated for 110 VAC at 1200 watts total capacity with a 10A internal fuse, making it suitable for powered monitors, amplifiers, and other audio gear in live venues, touring rigs, and professional studios. Its compact 1.5 H × 5.5 W × 5.5 D size fits standard rackmounts without taking up much space.
How does it compare to other power controllers?
The PC1 is a single-outlet unit designed for integration into larger control systems, whereas competitors like the Furman PL-8C and Tripp Lite ISOBAR4ULTRA offer multiple outlets and surge protection. If you need remote automation control and a smaller footprint over comprehensive surge and conditioning, the PC1 is the simpler choice.
What's included and what do I need to set up?
The PC1 ships with a 6 ft. grounded power cord and requires only a standard AC wall outlet and your contact closure control source (a control system, switch, or automation device) connected to the rear 4-pin captive-wire connector. No additional power conditioning or cables are required beyond what you already have.