AKG C562 CM Professional Flush-Mount Boundary Layer Microphone
Description
AKG C562 CM Professional Flush-Mount Boundary Layer Microphone
The AKG C562 CM is a compact boundary layer microphone engineered for recording applications where discreet placement and wide-area pickup are essential. Its flush-mount design sits nearly flush against surfaces, delivering consistent, intelligible audio capture across a wide area while remaining visually unobtrusive in the recording environment.
Design & Build
This microphone measures just 12 mm in length, 28 mm in height, and 20 mm in diameter, weighing only 30 g, allowing for seamless integration into any studio setup without visual interference. The matte nickel plated finish resists fingerprints and maintains a professional appearance through extended use.
Recording Characteristics
The C562 CM captures clear audio across the full spectrum with a 20 to 20,000 Hz frequency response, supported by an 78 dB-A signal-to-noise ratio and a low 16 dB-A equivalent noise level for detailed vocal and acoustic reproduction. Its hemispherical polar pattern captures sound evenly from all directions above the surface, ideal for recording multiple sources seated around a table or for room tone and ambience capture.
Key Features
- Frequency bandwidth: 20 to 20,000 Hz
- Sensitivity: 25 mV/Pa
- Equivalent noise level: 16 dB-A
- Signal-to-noise ratio: 78 dB-A
- Recommended load impedance: 2,000 Ohms
- Power supply: 9 to 52 V phantom power
- Current draw: 2 mA
- Balanced XLR male output on 3-pin connector
- Fixed 20-inch (50-cm) mini jack cable with phantom power adapter included
- Hemispherical polar pattern for 360-degree coverage above mounting surface
- Compact dimensions: 12 mm length × 28 mm height × 20 mm diameter
- Matte nickel plated finish
The AKG C562 CM combines professional-grade specifications with virtually invisible installation, making it ideal for studio work requiring discreet mic placement and reliable multi-source audio capture.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | China |
Reviews
At a Glance
The AKG C562 CM is a compact boundary layer microphone built for capturing clear dialogue and ambient sound in conference and presentation recording sessions. Its low 16 dB-A noise floor and flat 20–20 kHz response ensure articulate speech that sits cleanly in a stereo or surround mix, while its hemispherical pickup pattern naturally captures all speakers in the room without dead zones. Choose it for studio-based recording of meetings, panel discussions, and live-to-tape conference content where invisible mic placement and consistent off-axis rejection are essential.
Frequently Asked Questions
What does flush-mount boundary layer mean, and where does it install?
The C562 CM mounts nearly flush against a flat surface—typically a conference table, ceiling, or wall—and uses the surface as an acoustic boundary to enhance speech intelligibility. Its hemispherical polar pattern captures sound evenly from all directions above the mounting point, making it ideal for picking up multiple speakers seated around the same table.
What's included in the box, and how does it connect?
The C562 CM ships with a fixed 20-inch (50 cm) mini jack cable, a phantom power adapter, and balanced XLR male output on a 3-pin connector. It requires 9–52 V phantom power and draws only 2 mA, so it integrates easily into any standard pro-audio interface or mixing console.
How does the C562 CM perform in terms of noise and clarity?
It delivers a 78 dB-A signal-to-noise ratio and a very low 16 dB-A equivalent noise level, ensuring crisp, intelligible speech capture with minimal hum or ambient noise floor. Its full 20–20 kHz frequency response supports natural-sounding dialogue and environmental context without coloration.
How small is this microphone, and will it be visible during recordings or meetings?
At only 12 mm long, 28 mm tall, and 20 mm in diameter, and weighing just 30 grams, the C562 CM is virtually invisible when mounted flush. Its matte nickel plated finish blends professionally into any meeting environment without drawing attention during video calls or in-person sessions.
Can it capture audio from speakers sitting in different positions around a table?
Yes—its hemispherical polar pattern provides 360-degree coverage above the mounting surface, picking up sound evenly from all directions. This makes it ideal for conference tables and boardrooms where participants are seated around a central point.