DBX234XSV vs DBXDI1 — Compare
dbx 234xs Stereo 2/3 Way,Mono 4-Way Crossover with XLR Connectors vs dbx Di1 Active Direct Box
The dbx 234xs is a professional crossover for splitting audio signals across multiple speaker systems or frequency ranges, while the dbx Di1 is an active direct box for converting high-impedance instrument signals to balanced XLR for mixing consoles. Choose the 234xs if you're managing PA or multi-way speaker systems; choose the Di1 if you need to route instruments directly into a mixer or interface.
No sales tax on orders shipped outside California — total cost beats national retailers that charge sales tax in nearly every state.
dbx 234xs Stereo 2/3 Way,Mono 4-Way Crossover with XLR Connectors
Specs side by side
| dbx 234xs Stereo 2/3 Way,Mono 4-Way Crossover with XLR Connectors | dbx Di1 Active Direct Box | |
|---|---|---|
| Price | $380.00 | $195.00 |
| Brand | DBX | DBX |
| Year | Unknown | Unknown |
| Condition | New | New |
Why choose dbx 234xs Stereo 2/3 Way,Mono 4-Way Crossover with XLR Connectors
- ✓ Handles stereo 2/3-way or mono 4-way splitting with 24 dB/octave Linkwitz-Riley filters
- ✓ Comprehensive frequency control from 45 Hz to 9.6 kHz across multiple crossover points
- ✓ Built-in 40 Hz high-pass filter on each channel for clean low-end management
- ✓ Dynamic range exceeds 106 dB with SNR of 94 dB or better
Why choose dbx Di1 Active Direct Box
- ✓ Converts high-impedance instruments to balanced XLR for direct console input
- ✓ Transparent, colorless signal path suitable for studio and live use
- ✓ Compact, portable direct box design fits easily into any rig
- ✓ Dual output options provide routing flexibility for simultaneous monitoring or recording
Frequently asked questions
What is each device actually designed to do?
The 234xs splits incoming audio into separate frequency bands so you can send lows to a subwoofer, mids to mid-range speakers, and highs to tweeters. The Di1 converts unbalanced instrument outputs (like bass or keyboards) into balanced XLR signals suitable for mixing consoles, with no frequency splitting involved.
Can I use these together in a setup?
Yes. For example, you could run a bass through the Di1 to get balanced signal into a mixer, then use the 234xs later in the signal chain to route that mixed output to different speaker systems based on frequency.
Which one is right for my home studio or live band?
If you're recording or performing with instruments into a mixer or interface, get the Di1. If you're running a multi-speaker PA rig and need to route different frequencies to different boxes, get the 234xs.
Do either of these color the sound?
Both are designed for transparent, minimal coloration. The 234xs uses phase-coherent filtering to preserve audio integrity. The Di1 emphasizes faithful reproduction without unwanted tone shaping.