Antelope Audio Edge Go USB2/USB-C Condenser Modeling Mic
Description
Antelope Audio Edge Go USB2/USB-C Condenser Modeling Mic
The Edge Go is a studio-grade large-diaphragm condenser microphone that functions as a complete recording interface—no external preamp, mixer, or audio interface required. Its compact form factor and bus-powered USB-C connectivity make it an exceptionally portable solution for professional-quality recordings in any studio environment, while dedicated FPGA processing built into the microphone body delivers real-time mic modeling and effects without taxing your computer's CPU during critical tracking and overdub sessions.
Audio Performance & Design
Built with the same dual-diaphragm capsule technology as Antelope's flagship Edge Duo, the Edge Go captures audio at 192 kHz/24-bit resolution via USB output—far exceeding typical USB microphone fidelity. The large-diaphragm condenser design provides a flat response from 20 Hz to 20 kHz in transparent unmodeled mode, with a maximum SPL of 116 dB, allowing you to track everything from intimate vocals and acoustic instruments to loud drums and amplifiers with clean, undistorted capture.
Modeling & Real-Time Processing
The Edge Go includes 18 real-time microphone emulations modeled after iconic studio mics—fat-sounding tube designs like the Berlin 49T and Vienna 12, crisp FET condensers, and smooth ribbons—plus 20 built-in real-time effects including preamps, compressors, EQ, reverb, and tape saturation. All processing runs on dedicated 1x DSP and 1x FPGA hardware inside the microphone, leaving your computer free for recording and mixing without the latency or CPU overhead of plugin-based processing.
Key Features
- Large-diaphragm condenser microphone with double-sided 6µ gold-sputtered membranes
- 192 kHz/24-bit USB output via USB-C connectivity
- Bus-powered via USB (no external power supply or 48V phantom power required)
- Maximum SPL of 116 dB
- Flat frequency response 20 Hz – 20 kHz in transparent unmodeled mode
- 18 real-time microphone emulations (Berlin 47 FT, Berlin 49T, Vienna 12, Vienna 414, Tokyo 800T, Oxford 4038, Sacramento 121R, and more)
- 20 built-in real-time effects including AuraVerb reverb, preamps, compressors, EQ, and reel-to-reel tape modeling
- Integrated 1x DSP and 1x FPGA processing for zero-latency real-time effects without CPU load
- 3.5mm stereo headphone jack for zero-latency monitoring directly on the microphone
- Includes rugged shockmount, adjustable pop filter, desktop mount, and portable hard case
- Multi-pattern polar selection (cardioid, figure-8, omnidirectional)
- Backwards compatible with USB 2.0
The Edge Go combines Antelope's legendary A/D conversion and FPGA processing expertise with unprecedented mic-modeling access, delivering a complete professional recording solution that adapts to your studio's evolving tracking and production demands.
More Information
| Condition | New |
|---|---|
| Connection | Wired |
Reviews
At a Glance
The Edge Go is a self-contained recording microphone with integrated audio interface and DSP-powered modeling—18 iconic mic emulations and 20 studio effects process in real time on dedicated hardware, leaving your CPU free for tracking and mixing. Home studio owners and independent producers gain immediate access to boutique mic tones (Berlin tube designs, Vienna condensers, smooth ribbon characters) plus essential tools like compression, EQ, reverb, and tape saturation, all at 192 kHz/24-bit resolution over USB-C. Pick it to collapse your signal chain from microphone through preamp and effects into one portable, CPU-efficient box that delivers transparent, detailed recordings with character-modeling flexibility.
Who This Is For
Great for
- ✓ Home Recording
- ✓ Studio Sessions
- ✓ Podcasting
- ✓ Vocal Recording
Not the best pick for
- – Live Performance
- – Gigging
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What microphones does the Edge Go model, and can I use multiple emulations in one session?
The Edge Go includes 18 real-time microphone emulations modeled after iconic studio mics including the Berlin 49T and Vienna 12 tube designs, crisp FET condensers, and smooth ribbons like the Oxford 4038. You can switch between emulations and layer them with effects in real time using the dedicated DSP and FPGA hardware, all without burdening your computer's CPU.
Do I need an external preamp, audio interface, or power supply?
No. The Edge Go is fully self-contained—it functions as both microphone and complete recording interface with built-in preamp and effects processing. It powers via USB-C bus power, requires no external phantom power or wall adapter, and outputs 192 kHz/24-bit audio directly to your computer.
Is the Edge Go suitable for quiet vocal work and louder sources?
Yes. The microphone delivers a flat frequency response from 20 Hz to 20 kHz in transparent unmodeled mode, with a maximum SPL of 116 dB, making it well-suited for both delicate vocal takes and louder instruments or spoken-word content.
What's included in the box, and how portable is the setup?
The Edge Go ships with a rugged shockmount, adjustable pop filter, desktop mount, and portable hard case. Its compact form factor and USB-C bus power make it exceptionally portable for professional recordings anywhere—home studio, bedroom, travel, or field work.
What skill level or experience do I need to use the Edge Go effectively?
The Edge Go is designed for intermediate, advanced, and professional users. While the microphone itself is easy to plug in via USB-C, getting the most from its 18 emulations and 20 effects requires familiarity with mic selection, modeling, and signal processing—though the included shockmount and pop filter handle basic studio setup immediately.
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.