Crown XTi 4002 Two-Channel 1200W Power Amplifier
Description
Crown XTi 4002 Two-Channel 1200W Power Amplifier
The Crown XTi 4002 is a compact, high-headroom two-channel power amp engineered for studio and project recording environments where clean amplification matters. Its integrated cast-aluminum handles and efficient 3.5" x 19" x 12.25" form factor fit neatly into standard racks alongside your interface, mixer, and monitoring equipment. The large LCD screen and onboard DSP deliver real-time feedback and sculpting power for tracking, mixing, and playback—precision amplification that keeps your monitoring reference accurate session after session.
Power & Performance Specifications
The XTi 4002 outputs 1200W @ 4Ω stereo or 3200W @ 4Ω bridged (mono), with per-channel ratings of 1600W @ 2Ω, 1200W @ 4Ω, and 650W @ 8Ω. Distortion stays exceptionally low at <0.5% THD, paired with a 100 dB A-weighted signal-to-noise ratio and 20 Hz–20 kHz frequency response, ensuring transparent amplification that reveals every detail in your mixes without coloration or artifacts.
Protection & Creative Control
Peak Plus Limiters give you precise control over threshold, attack, and release for protecting speakers during tracking peaks and dynamic sessions. The amp includes three user-defined fan mode controls (normal, early, full speed) to match cooling to your workflow and room environment, plus integrated safeguards against short circuits, thermal overload, and power surges—critical for uninterrupted recording and mixing sessions.
Key Features
- 1200W @ 4Ω stereo; 3200W @ 4Ω bridged (mono)
- 1600W @ 2Ω, 1200W @ 4Ω, 650W @ 8Ω per channel
- Two channels
- THD: <0.5%
- Signal-to-Noise Ratio: 100 dB, A-weighted
- Frequency Response: 20 Hz–20 kHz (+0 dB, –1 dB)
- Input Sensitivity: 1.4 V
- Integrated cast-aluminum handles with large LCD screen
- Peak Plus Limiters with threshold, attack, and release control
- Three user-defined fan mode controls (normal, early, full speed)
- Onboard DSP with 50 presets (49 user-definable)
- Universal switch-mode power supply with 15A IEC connector; integrated protection against short circuits, thermal overload, and power surges
The Crown XTi 4002 combines reliable power delivery with the sonic clarity and flexible control needed for accurate studio monitoring and active speaker amplification in home and project studios.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | China |
Reviews
At a Glance
The Crown XTi 4002 is a two-channel studio and mastering power amplifier that delivers 1200W per channel at 4Ω with exceptionally low distortion (under 0.5% THD) and a pristine 100 dB signal-to-noise ratio. Engineers and producers rely on it for transparent amplification in mixing, mastering, and monitoring workflows, where its onboard DSP, peak limiting, and user-defined presets provide flexible, repeatable control over speaker systems. Its versatile impedance matching (2Ω, 4Ω, 8Ω per channel, plus bridged mono) adapts to any nearfield or main monitor configuration.
Frequently Asked Questions
How much power does the XTi 4002 deliver, and what impedances does it support?
The XTi 4002 outputs 1200W at 4Ω stereo (two channels) or 3200W at 4Ω bridged in mono. Per-channel ratings are 1600W @ 2Ω, 1200W @ 4Ω, and 650W @ 8Ω, so it adapts to a wide range of speaker and system configurations.
What protection and control features does it offer for live or installed use?
Peak Plus Limiters let you set threshold, attack, and release independently, plus three user-defined fan modes (normal, early, full speed) match cooling to your venue or environment. Built-in safeguards protect against short circuits, thermal overload, and power surges.
Does it have onboard DSP and presets?
Yes, the XTi 4002 includes onboard DSP with 50 presets—49 user-definable—so you can save and recall system settings across multiple gigs or monitor positions without reconfiguring the amp each time.
How transparent is the amplification, and what is the frequency response?
Distortion is exceptionally low at under 0.5% THD, with a 100 dB A-weighted signal-to-noise ratio and flat frequency response from 20 Hz to 20 kHz, ensuring clean, accurate amplification across the full audio spectrum.
Is it practical for transport and rack mounting?
Yes, the XTi 4002 is compact at 3.5" high x 19" wide x 12.25" deep with integrated cast-aluminum handles, making it suitable for standard 19" rack systems and manageable for loading into trucks or transporting between venues.