JBL PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System sku number PRX710

JBL PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement S

JBL PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System
$749.00
Out of stock
SKU PRX710
JBL PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System

PRX710 is a compact and ultra-lightweight speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size.

Features:
  • 133 dB peak SPL
  • 10" low-frequency driver for low-distortion and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Normal and Boost user selectable EQ pre
  • DSP input section,crossover,dynamic limiting,component optimization,selectable system EQ.
  • Line level and direct microphone input capability
  • Professional XLR-1/4" combination inputs,RCA inputs,and XLR loop-through
  • Integrated 36 mm pole mount socket
  • Integrated handle with injection molded backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
  • Cloth backed,dent-resistant 16 gauge steel grilles
Applications:
  • The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer,offering a high performance self-powered sub/sat system.
  • The PRX710 is comprised of a 10" woofer,a 2408H-2,37.5 mm (1.5 in) annular polymer diaphragm,neodymium compression driver mounted to a 100° by 60° horn,all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section,providing user selectable system EQ,protection,input sensitivity selection,cross-over functionality,dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm,strong,light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
  • The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility,making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

Specifications:
  • Power Rating: 1500 W
  • AC Power Input: 100V - 240V~ 50/60 Hz
  • Frequency Range (-10 dB): Normal: 50 Hz - 19.6 kHz / Boost: 42.9 Hz - 20 kHz
  • Frequency Response (±3 dB): Normal: 63.5 Hz – 18.5kHz / Boost: 53 Hz – 18.6kHz
  • Coverage Pattern: 100° x 60° nominal
  • Directivity Index (DI): 9 dB
  • Directivity Factor (Q): 8
  • Crossover Frequency: 1.9 kHz
  • Maximum SPL: 133 dB
  • Signal indicators:
    • Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
    • Signal: Green LED indicates signal present
    • Power/Standby: Blue indicates system has power and ready to pass audio,Red indicates system has power but is in a power saving mode and will not pass audio.
  • Dynamic Control (Input): dbx Type IV™ limiter circuit
  • Input Impedance: 20K Ohms (balanced),10K Ohms (Unbalanced)
  • LF Driver: 1 x JBL M110-4 250mm (10 in) woofer
  • HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm,neodymium compression driver
  • Enclosure: Rectangular,18 mm,plywood
  • Suspension/Mounting: single 36 mm pole socket,8 x M10 Suspension Points,1 x M10 pull back point
  • Transport: 1 x integrated handle with injection molded backing cup
  • Finish: Obsidian DuraFlex™ finish
  • Grille: Powder coated,Obsidian,16 gauge perforated steel with acoustical transparent black cloth backing.
  • Input Connectors: 2 x Balanced XLR / 1/4 inch input,2 x unbalanced RCA input
  • Output Connectors: 1 male XLR balanced output.
  • Dimensions (H x W x D): 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69 in)
  • Net Weight: 16.4 kg (36 lb)

More Information
ConditionNew
Country of ManufactureChina
★★★★★
★★★★★
© 2018 Studio Gears. All Rights Reserved.