| Power Rating |
: |
1750 Watts Peak
875 Watts Continuous |
|
| Frequency Range |
: |
57 Hz - 20 kHz
(-10 dB) |
|
Dimensions
(H x W x D) |
: |
349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
|
| Frequency Response |
: |
75 Hz - 20 Hz
(+/-3db) |
|
| Maximum Peak Output |
: |
136 dB SPL at 1m |
|
| Coverage Pattern |
: |
100 x 15 nominal |
|
| DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) |
: |
LF: 750 Watts, HF: 125 Watts |
|
| DPC-2 Output Sectoin |
: |
LF: Dual-Bridged Technology™, Class D |
|
| Autio Input Connector |
: |
XLR with loop through |
|
| LF Driver |
: |
1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
|
| HF Driver |
: |
3 x JBL 2408J, 38 mm (1.5 in) |
|
| User Controls |
: |
Input Attenuator (0-16 dB) |
|
| Signal Processings |
: |
DSP based, resident in Input Module |
|
| AC Power Operating Range |
: |
90-132 VAC or 216-264 VAC, 50/60 Hz |
|
| AC Input Connector |
: |
Neutrik PowerCon (NAC 3MPA) |
|
| AC Loop Through Connector |
: |
Neutrik PowerCon (NAC 3MPB) |
|
| AC Current Requirements |
: |
6A per system at 120V, 3A per system at 240V |
|
| Enclosure |
: |
25/15 mm, 11-ply birch plywood |
|
| Suspension / Mounting |
: |
Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
|
| Finish |
: |
Black DuraFlex™ finish |
|
| Grille |
: |
Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
|
| Net Weight |
: |
24 kg (52 lb) |
|
| Optional Accessories |
: |
VRX-AF: Suspension array frame |
|
ABOUT
CONTACT
SPECIALS
PRODUCTS
HOME
All Rights Reserved.
Return Policy
Privacy Policy
FAQ
Store Hours: 7am - 5pm PST
Live Chat
contact@studiogears.com
Twitter
Newsletter Signup
G+
Instant Rebates
Coupons
Featured Combos