Products
Special Products

Advanced Search

Newsletter

Your information will not be shared.
Pro Audio and Video > Pro Audio > Loudspeakers

JBL PD5125-W RX High Output Low Frequency Loudspeaker With Weather Protection Treatment - JBL

Print This Page Show a Friend Add to Wishlist Bookmark and Share
JBL PD5125-W RX High Output Low Frequency Loudspeaker With Weather Protection Treatment - JBL
List Price:$3,349.00

Our Price:$2,218.37

You Save: $1,130.63!

Quantity:
add to cart compare


JBL PD5125-W RX High Output Low Frequency Loudspeaker With Weather Protection Treatment

The PD5122 is intended for use as a flown or ground supported, high power low frequency module used in conjunction with mid/high-only or fullrange systems of the PD5000 series.

Features :   Specifications :
  • Dual high power 300 mm (12 in) low frequency drivers.
  • Designed to extend LF pattern control of PD5322 systems.
  • Slot-loaded configuartion duplicates LF performance of PD 5322.

Frequency Range : 41 Hz to 1 kHz
(-10 dB)

Frequency Response : 49 Hz to 300 kHz
( 3 dB)

Transducer Power
Rating (AES)
: 1600W
(6400 W peak) 2 hrs

Long-Term System Power Rating (IEC) : P1200 W (4800 W peak), 100 hrs

Maximum SPL : 128 dB-SPL cont avg (134 peak)

Input Modes : Drivers Parallel / Drivers Discrete

Nominal Impedance : 4 ohms in parallel-drive mode

Sensitivity6 (1W, 1m) : 116 dB-SPL

Low Frequency Driver : 2 x JBL 2206H 300 mm (12 in) VGC drivers with 100 mm (4 in) voice coil with minimal power compression and low distortion

Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply

Sensitivity (1W, 1m) : 109 dB-SPL14 dB-SPL

Waveguides : MF: PT-N64MF 600 x 600 mm (24 x 24 in) HF: PT-H64HF 300 x 300 mm (12 x 12 in)

Enclosure : Trapezoidal with 15 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood.

Suspension Attachment : 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).

Finish : Black DuraFlex™ finish. White (-WH) available upon request.

Optional Weather Resistant Versions : WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments.

Grille : Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)

Input Connectors : Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.

Environmental Specifications : Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX.

Dimensions (H x W x D in vertical orientation) : 357 x 673 x 706 mm (14.1 x 26.5 x 27.8 in)

Net Weight : 36.4 kg (80 lb)

Optional Accessories : 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts

 

 



Related Products

Shopping cart
Proceed To Secured Checkout

What’s new