Description

JBL LSR6328P/5.I 5.I Surround System with RMC Room Mode Correction

BL LSR6328P/5.1

The LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. With ruler-flat +1 dB/-1.5 dB response from 50 Hz to 20 kHz, low frequency extension to 36 Hz, boundary compensation and JBL's new RMC™ system, the LSR6328P gives you exceptional low frequency performance in any room. The system is bi-amped with a 250 Watt LF amplifier and a 120 Watt HF amplifier. Wall mounting provisions make the LSR6328P perfect for installation in multi-channel editorial rooms.

The LSR6312SP powered subwoofer is based on a 12" woofer with JBL's patented Neodymium Differential Drive® and 250 Watts of power. An integral bass-management system provides all the features you need for today's multi-format surround production including: LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4 dB alignment setting, and JBL's new RMC™ Room Mode Correction system. RMC Calibration Kit included.

Kit includes: LSR6328P (x5) and LSR6312SP (x1)

• Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position
• RMC™ Room Mode Correction provides electronic control of room modes. User measurement and calibration kit available.
• Differential Drive® technology with dynamic braking for extended low frequency response and minimal power compression.
• Integrated bi-amplification with factory calibrated sensitivities.
• Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise pattern control.
• Magnetically shielded high frequency transducer minimizes interference when used in close proximity to video monitors.
• High-density baffle for low enclosure resonance.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Reinforced enclosure and convenient mounting points for mounted installation.
• Integral handles facilitate ease of positioning.

• Frequency Response (+1, -1.5 dB): 50 Hz - 20 kHz
• Enclosure Resonance Frequency: 38 Hz
• Low Frequency Extension: User controls set to default
• -3 dB: 46 Hz
• -10 dB: 36 Hz
• Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
• Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
• Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
• Signal Input: Neutrik “Combi" XLR- -in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 ( " tip) produces outward woofer motion
• Calibrated Input Sensitivity, XLR & ":
• +4 dBu / +8 dBu: 96 dB SPL / 1 m
• -10 dBV: 96 dB SPL / 1 m
• Low Frequency Model: 218F
• Diameter: 203 mm (8 in)
• Voice Coil: 38 mm (1.5 in) Differential Drive® with dynamic braking coil
• Magnet Type: Ferrite, with integral heat sink
• Cone Type: Carbon fiber composite
• Impedance: 2 ohms
• High Frequency Model: 053TiS
• Diameter: 25 mm (1 in) diaphragm
• Voice Coil: 25 mm (1 in)
• Magnet Type: Ferrite, shielded
• Diaphragm Type: Damped titanium composite
• Other Features: Elliptical oblate spheroidal waveguide
• Impedance: 4 ohms
• Finish: Smooth dark graphite
• Handles: 2 each, flush mounted on sides
• Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
• Enclosure Volume (net): 28 liter (1 cu ft)
• Low Frequency Vent: Rear ported linear dynamics aperture (integrated with amplifier heat sink)
• Baffle Construction: Injection-molded structural ABS
• Enclosure Construction: 19 mm ( in) MDF
• Net Weight: 17.7 kg (39 lb)
• Dimensions (WxHxD): 406 x 330 x 325 mm (16 x 13 x 12.8 in)

• Multi-format powered subwoofer for Dolby Prologic, AC-3, DTS and other surround formats.
• RMC™ Room Mode Correction provides electronic control of response peaks due to room modes. RMC Calibration Kit included.
• 250 Watt continuous output power amplifier.
• Sophisticated LCR bass management system.
• Direct LFE input with selectable 10 dB input sensitivity.
• Summed output allows chaining of multiple LSR6312SP for multiple subwoofer systems.
• Neodymium Differential Drive NDD™ technology with dynamic braking for extended low frequency response and low power compression.
• High-density baffle for low resonance and stable inertial ground.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Reinforced enclosure and convenient mounting points for mounted installation.

• Frequency Response: (-6 dB)1: 28 - 80 Hz
• Low Frequency Extension: User controls set to default
• -3 dB: 34 Hz
• -10 dB: 26 Hz
• Enclosure Resonance Frequency: 28 Hz
• Low-To-High Crossover Frequency: 80 Hz (4th order electroacoustic Linkwitz-Riley)
• Maximum Continuous SPL: >112 dB SPL / 1 m (35 Hz - 80 Hz)
• Maximum Peak SPL: >115 dB SPL / 1 m (35 Hz - 80 Hz)
• Calibrated Input Sensitivity: XLR or ", Selectable -10 dBV, +4 dBu, +8 dBu: 96 dB / 1 m
• Power Nonlinearity (20 Hz - 200 Hz):
• 30 Watts: <0.4 dB
• 100 Watts: <1.0 dB
• Low Frequency Model: 252F
• Diameter: 300 MM (12 in)
• Voice Coil: 50 mm (2 in) Differential Drive® with dynamic braking coil
• Magnet Type: Neodymium, with integral heat sink
• Cone Type: Carbon fiber composite
• Impedance: 2 ohms
• Finish: Smooth dark graphite
• Enclosure Construction: 19 mm (¾ in) MDF
• Mounting: 4 threaded mounting points conforming to industry standard square pattern 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
• Baffle Material: Injection molded structural ABS
• Enclosure Volume (net): 50 liter (1.8 cu ft)
• Net Weight: 22.7 kg (50 lb)
• Dimensions (WxHxD): 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)

Specs

Media

Reviews

Related

Similar