JBL C50PACK Control 50 Pack Loudspeaker System with Subwoofer Black

Speakers

• Stylish and compact enclosure

• Can be mixed and matched with Contractor 40 series ceiling speakers

• 2.5" driver with an efficient magnet structure, as well as a rubber half roll surround for enhanced bass performance

• Copper-clad aluminum wire voice coil is on a vented Nomex former to provide high fidelity and reliability

• Copper-capped pole piece provides consistent impedance and extended HF response

• Works with 70/100V distributed lines and low impedance systems for terrific versatility

• Included wall mounting bracket lets you angle the speaker up to 45 off-axis

Subwoofer

• Sleek, stylish design fits into a wide variety of decors

• Durable plywood construction with MDF port and terminal panels and a zinc-plated metal grille

• Large 8" long-excursion woofer with a high-mass cone, 4-layer copper voice coil, aluminum former, and rubber half roll surround for exceptional bass performance

• 150W of continuous power handling capability for a strong performance

• Selectable 70/100V distributed line outputs, as well as low impedance operation

• Can be used with 2 or 4 satellites for versatility

• Can mix and match with Control Contractor 40 in-ceiling models

• Wall mounting hardware included

Speakers

Driver

2.5" (60mm) Polypropylene Cone with Butyl Rubber Surround, Copper-Clad Aluminum Voice Coil, and Vented Nomex Former

Frequency Response

140Hz - 20kHz (-10dB)

Power Capacity

50W Continuous Program Power (2 Hours)
25W Continuous Pink Noise (2 Hours)
30W Continuous Program Power (100 Hours)
15W Continuous Pink Noise (100 Hours)

Sensitivity

85dB (4.0V/1 m = 1W)
82dB (2.83V, 1 m)

SPL

94dB, Average
100dB Peak

Connectors

Removable Locking 2-pin Connector with Screw-Down Terminals

Enclosure

High-Impact Polystyrene with Painted Zinc-Plated Metal Grille

Dimensions (HxWxD)

4.5 x 3.3 x 3.75" (115 x 84 x 96mm)

Weight

1.5 lbs (0.7kg)

Subwoofer

Driver

8" (200mm) Polypropylene Cone with Butyl Rubber Surround, 1.5" 4-Layer Copper-Clad Voice Coil, and Vented Aluminum Former

Frequency Range

32-299Hz (-10dB)

Impedance

8 Ohms (Bypass/Thru Mode)

Maximum Power Handling

300W Continuous (Program, 2 Hours)
150W Continuous (Pink Noise, 2 Hours)
200W Continuous (Program, 100 Hours)
100W Continuous (Pink Noise, 100 Hours)

Maximum Sound Pressure Level (SPL)

115dB Average, 121dB Peak (Corner)
109dB Average, 115dB Peak (Center)

Controls and Indicators

1 x Volume Control

Connectors

6 x Removable Locking 2-Pin Connectors with Screw-Down Terminals

Shielded

No

Enclosure Material

Plywood and MDF Cabinet with Zinc-Plated Metal Grille

Dimensions (HxWxD)

14 x 15.4 x 8" (356 x 391 x 203mm)

Weight

20 lbs (9kg)