Frequency Range
(-10 dB) |
: |
20 Hz - 1 kHz |
|
Frequency Response
( 3 dB) |
: |
25 Hz - 1 kHz |
|
| Transducer Power Rating |
: |
4000 W (16000 W peak), 2 hrs. |
|
| Input Modes |
: |
Drivers Parallel / Drivers Discrete |
|
| Long-Term System Power Rating |
: |
2400 W (9600 W peak), 100 hrs. |
|
| Maximum SPL (1m) |
: |
25 Hz - 200 Hz: 135 dB-SPL
cont avg. (141 dB peak) |
|
| System Sensitivity |
: |
25 Hz - 200 Hz: 99 dB-SPL,
1W (2.0V) @ 1m |
|
| Nominal Impedance |
: |
4 ohms in parallel-drive mode
2 x 8 ohms in discrete-drive mode |
|
| Low Frequency Driver |
: |
2 x 2269H, 460 mm (18 in) dia.,
100 mm (4 in) Dual Coil Dual
Gap neodymium Differential Drive®, VGC™ drivers |
|
| Enclosure |
: |
Rectangular cabinet, 16 mm (5/8 in)
exterior grade 11-ply birch plywood |
|
| Suspension Attachment |
: |
16 points (4 top, 4 bottom, 4 each side)
M10 threaded hardware |
|
| Finish |
: |
Black DuraFlex™ finish.
White available upon request. |
|
| Grille |
: |
Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
|
| Input Connector |
: |
NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
|
| Environmental Specifications |
: |
Mil-Std 810; IP-x3 per IEC529. |
|
Dimensions (H x W x D in
vertical cabinet orientation) |
: |
1092 x 560 x 815 mm
(43.0 x 22.0 x 32.1 in) |
|
| Net Weight |
: |
71.9 kg (158.5 lb) |
|
| Optional Accessories |
: |
M10 x 35 mm forged shoulder
eyebolts with washers. |
|
ABOUT
CONTACT
SPECIALS
PRODUCTS
HOME
All Rights Reserved.
Return Policy
Privacy Policy
FAQ
Store Hours: 7am - 5pm PST
Live Chat
contact@studiogears.com
Twitter
Newsletter Signup
G+
Instant Rebates
Coupons
Featured Combos