Description
Some harder-to-work-with applications of SheetBlok (such as ceilings) require an adhesive to temporarily mount the product until the finishing layers can be assembled. That's where SheetBlok-Plus Sound Isolation Barrier comes in. SheetBlok-Plus is a dense, limp-mass material that comes with a PSA (pressure-sensitive adhesive) already attached!
Just peel off the PSA backing and apply the SheetBlok Plus to the area to be covered and that's it! And while it's not meant to be a permanent mounting solution, it will easily hold your SheetBlok up until you're ready to put the finishing layers over it. SheetBlok Plus eliminates the hassles of troweled-on adhesives and mechanical fasteners and can save tons of time.
- dense, limp-mass vinyl material that is about 6dB more effective than solid lead at stopping the transmission of sound with peel and stick backing for easily installation
- Service Temperature: -40F to 180F
- Tensile Strength: 400 psi Tear Strength: 70#/inch; Flammability: Rated UL94 S.E. "0"; Passes test MVSS-302
- 30'x4' Roll of Mass-Loaded Vinyl with Peel and Stick Backing; Black Only
ABOUT
CONTACT
SPECIALS
PRODUCTS
HOME
All Rights Reserved.
Return Policy
Privacy Policy
FAQ
Store Hours: 7am - 5pm PST
Live Chat
contact@studiogears.com
Twitter
Newsletter Signup
G+
Instant Rebates
Coupons
Featured Combos