Description

Sony HDCU900 Camera Control Unit for HDC-900 series HD camera B-Stock

High Definition Camera Control Unit for the HDC-900 / 910 and HDC-950 / 930 series system cameras. Option boards are available for 525 composite analog, HD analog, 720 progressive output as well as 3:2 pulldown output from 24P imaging (HDC-900/950 only). The HDCU-900 is capable of being the control unit for the HDC-700 series in a 60i environment.

Sony HDCU900 Highlights:

• 4 HD SDI Return Inputs
• 4 SD SDI Outputs 480/576 lines
• 1 WF and 1 PIX analog RGB 480/576 line monitor outputs
• 1.5 Gb/s SMPTE-304M based optical fiber digital transmission interface

Sony HDCU900 Specifications:

• Power supply - AC 100/110-120/220/240 V, 50 HZ/60 HZ
• Current Consumption - 5 A (at 100 V AC, entire system active)
• Operating temperature - +5 °C to 40 °C (+41 °F to 104 °F)
• Storage temperature -20 °C to +60 °C (-4 °F to +140 °F)
• Dimensions ( Approx. W x H x D) - 424 x 133 x 460 mm (16 3/4 x 5 3/4x 18 1/8 inches)
• Mass ( Approx.) - 20 kg (44 lb. 1 0z)
• HD SDI output - BNC type (x3), SMPTE-292M, 1080/50i, 60i, 30P, 25P, 24P
• HD monitor output - BNC type (x1), SMPTE-292M, 1080/50i, 60i, 30P, 25P, 24P
• HD SDI return input - BNC type (x4), SMPTE-292M, 1080/50i, 60i, 30P, 25P, 24P
• SD SDI output - BNC type (x4), SMPTE-259 M, Serial digital composite, 480/576-lines
• SD monitor output - BNC type, WF (x1), Pix (x1), Analog R/G/B, 480/576-lines
• Reference input - BNC type (x1, with loop-through ),HD tri-level sync or SD Black Burst
• Sync - BNC type (x1), HD tri-level sync or SD Black Burst
• Intercom PD & ENG - D-sub 25-pin (x1), 4W/RTS/CC selectable
• R-Tally/G-Tally - PGM 1/ PGM2 - 24 V power in/make contact
• MIC1/MIC2 output - PGM 1/ PGM2 - XLR-3-31 type (Female x2), 0/-20 dBu selectable
• Digital Audio output - PGM 1/ PGM2 - BNC type 9x1), AES/EBU format, 20-bit/48 kHZ
• Prompter in - PGM 1/ PGM2 - BNC type (x1, with loop-through ), Analog, NTSC/PAL/HD-Y
• RCP/MSU/CNU interface - PGM 1/ PGM2 - 8-pin (x1), Sony Camera Command Network Protocol (for entire camera system control)
• WF mode - PGM 1/ PGM2 - 4-pin, Stair step (for SD composite Waveform monitor)
• WF control - PGM 1/ PGM2 - D-sub 15-pin (x1), GPI (for SDI component WF control)
• System Expansion - PGM 1/ PGM2 - D-sub 15-pin (x1), GPI (for system control with external GPI interface)
• Trunk line - PGM 1/ PGM2 - D-sub 9-pin, RS-232C, (remote line for CHU equipment)
• Optical fiber cable interface - PGM 1/ PGM2 - SMPTE-304M based optical fie connector (x1), 1.5 Gb/s optical fiber digital transmission, SMPTE-292M, AC 240 V

Specs

Media

Reviews

Related

Similar